CNC PCB V Cut Machine Printed Circuit Board Laser PCB Depaneling
Specifications
1, Machine name: CNC V-CUT HT-1200 CNC V-CUT cutting machine
2, Power: AC220V ± 5V, 1 ¢ 50HZ 5KVA (requirements must be equipped
with a power regulator)
3, air source: 0.5Mpa 50NL / Min
4, vacuum: the minimum air flow 15m3 / min; minimum static pressure
50mm / Aq
5, processing maximum size: 1250mm * 650mm
6, processing minimum size: 105mm * 105mm
7, Thickness: 0.4mm ~ 3.2mm
8, precision: parallel precision ± 0.05mm, residual thickness
accuracy: ± 0.05mm, Pitch: ± 0.05mm, Alignment of the upper and
lower knives ± 0.05mm
9, machining position: first knife minimum of 8mm, single-side
processing unlimited number of cutting line can be set arbitrarily.
10, machine-hop Cutter: Cutter machine processing can be set
arbitrarily jump jump jump knife blade number and location.
11, residual thickness settings: machine has three types of
residual thickness can be set to three different shades of a single
surface residual thick.
12, machine structure: one machine base design using casting
methods to ensure stable machine performance.
13, machine size: L2400mm * W1900mm * H1600mm
14, machine weight: 3800KG
The operating system
1, The machine uses Microsoft WindowsXP system, Chinese and English
operation interface, Easy to operate . Parameter setting procedure
is simple. First, Set the board size , Then setting the position
data of the cutting line . Finally Set of the residual thickness of
cutting , then complete the processing.
2, The machine displays including Machine showed pictures and data.
real-time tracking processing icon displays the current processing
position, allowing the operator In real time to understand the
whole process.
3, the machine has a test function, to avoid improper setting data
sheet metal scrap, in the data set is completed After the first
board with test function, test cutting short distance to check the
cutting position and the actual position is consistent, as
Inconsistent correction processing parameters can be carried out.
4, Machine has a blades protective function, in order to avoid
residual thick outer diameter of the tool set and improper settings
blades damage.
Machine hardware configuration
1, both machines were imported each axis servo control system to
ensure the stability and performance of the machine precision, push
plate axis, Cutter shaft and the upper and lower blade shaft using
servers and servo motors, servo wheel servers and servo motors.
2, The main control board is the United States six axis motion
control card.
