Car Lift Parking For Basement Hydraulic Portable Lift For Car with CE
with 2 Years Warranty
Application:
The Car Lift Parking For Basement Hydraulic Portable Lift For Car is a widely used car lift equipment. It's scissor structure, make
the lifting platform stability , wide platform size and high load
capacity, with higher lifting height . It makes a lot of work more
efficient and more security. It is easy to park your car in ground
garage with more efficient and more security.
Safety:
1) The platform equipped with antiskid plate to prevent slipping,
it is enough safe when it works.
2) The work table would equipped the guardrail to guarantee the
safety.
3) The lift has hydraulic overload protective organization to
ensure that equipment will not lift when the load beyond its rated
load capacity.
4) The machine equipped single control solenoid valves to prevent
the platform dropping if power failure. You can open the manual
dropped valve to lower the platform to the home position.
Advantages:
Hydraulic lifting system, the far-end control and multi-control
points at the different floors could be realized hierarchical
control. Stop anywhere at the pre-concerted and accurate location
point. It can work under any condition, great load capacity, safe
and reliable. There are sensitive overload protection locking
device to avoid falling for the Car Lift Parking For Basement Hydraulic Portable Lift For Car .
The models we supplied for clients:
MODEL | LOAD CAPACITY | PLATFORM SIZE | LIFT HEIGHT | PIT DEPTH | POWER |
SJG2.5-3 | 2.5T | 5.2m x 2.6m | 3m | 600mm | 220V, 240V, 380V or 400V |
SJG2.5-3.5 | 2.5T | 5.2m x 2.6m | 3.5m | 700mm | 220V, 240V, 380V or 400V |
SJG2.5-5 | 2.5T | 5.6m x 3m | 5m | 750mm | 220V, 240V, 380V or 400V |
SJG3-2.5 | 3T | 5m x 2.3m | 2.5m | 700mm | 220V, 240V, 380V or 400V |
SJG3-3 | 3T | 5.2m x 2.6m | 3m | 750mm | 220V, 240V, 380V or 400V |
SJG3-3.5 | 3T | 5.6m x 2.7m | 3.5m | 800mm | 220V, 240V, 380V or 400V |
SJG8-2.5 | 8T | 6.5m x 4.5m | 2.5m | 750mm | 220V, 240V, 380V or 400V |
SJG12-3 | 12T | 5.5m x 2.8m | 3m | 850mm | 220V, 240V, 380V or 400V |
SJG15-4.5 | 15T | 8m x 2.2m | 4.5m | 950mm | 220V, 240V, 380V or 400V |
The Car Lift Parking For Basement Hydraulic Portable Lift For Car can be customized as your detailed size. |
Configuration:
1) Platform Material:120mm*60mm rectangular tube +6mm checkered
iron
2) Scissor material: 200mm*100mm*15mm high strength Manganese
Steel.
3) Hydraulic system: 380V/5.5Kw
4) High Precision Hydraulic Cylinder: 110*4sets
5) Piston Rod: 70*4 hard chromium plating surface.
6) High-pressure oil pump
7) Hydraulic oil: summer 46#, winter 32#
8) Controller: 1 control box below, 1 control panel above platform
The products:
The Certificates:
Our services:
1) The Car Lift Parking For Basement Hydraulic Portable Lift For Car can
be done as your request
2) Shipment can be arranged from our port to your destination port.
3) Operation video can be sent to you if needed.
4) English manual for car lift installation , using and maintenance.
5) 2 years warranty for whole machine without man-made faults.
6) We will send you parts for free with non-human factor faults
during warranty time.
7) Supply 24-hours technical assistance by email, telephone or
skype.
8) Engineers are available to your country if necessary.
