OEM/ODM Single Phase Din Rail Energy Meter With Far Infrared and
RS485 Communication
Production Description:
Model YEM011GC single phase din rail active energy meter is the new
type din rail energy meter of our company, Yomin Eletric. It can be
used to measure single phase AC active energy consumption when the
rated frequency is 50Hz or 60 Hz. Every performance index of the
din rail energy meter YEM011GC is in conformity with the technical
requirments for din rail energy meterstipulated in international
standard IEC 62053-21. Din rail energy meter YEM011GC adopts
exclusive LSI circuit, which has a simple structure, less external
components and with high reliability and long-life service. It have
7 digits display to show the total power consumption. It has
features of easy installation, all you need to do is to install it
on 35mm din rail. Besides, it have RS485 data communication module,
and it can contact with all kind of AMR system.
Specification
Model | Accuracy | Reference Voltage | Current Specification | Starting Current | Insulation Performance |
YEM011GC | Class 1 | 127/230V | 5(30)A 10(50)A 20(100)A | 0.02A 0.04A 0.08A | AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
* If you need different reference voltage or current specification,
please advisory our sales personnel.
Competitive Advantage
1. The meter adopts latest imported integrated-circuit exclusively
for electrical energy with digital
multiplier, which has greatly improved the dynamic working range of
the meter and make the actual
overload capacity up to more than 10 times.
2. The meter has a simple structure, a few external components and
low power consumption.
3. May select 6+1 digits display (999999.9kWh) or 5+2 digits
display, it can be arbitrary set by users from far infrared or port
of RS485 data communication.
4. Standard configuration one port of pulse output passive
(polarity),May select increase a distant port of pulse output
passive (nonpolarity), complying with standard IEC 62053-31.
5. There are a port of far infrared data communication and a port
of RS485 data communication. Standard configuration communication
agreement complying with standard DL/T645-1997, can also choose any
other communication agreement.
6. Three LED instructions power supply state, signal of energy
impulse and communication state.
7. Standard configuration don’t detection direction of the flow of
load current. May select automatic detection the direction of the
flow of load current. And instructions by an individual LED.
8. Single direction measure single phase two wire active energy
consumption. It is nothing with direction of the flow of load
current. Complying with standard IEC 62053-21.
9. Standard configuration type S wiring for direct connect
operation, can also choose another type of connection, and use CT
(Product Configuration code is FC) and PT & CT (Product
Configuration code is EC) for operation.
10. Components adopted in the meter are of high quality, which
guarantee the meter a long
service life and high reliability.
Dimension
Wiring Diagram
Terminal | Note |
L | Phase Line |
N | Neutral Line (Inlet from Bottom, Outlet from Top) |
3 and 4 | Port of Pulse Output Passive |
1 and 2 | Port of RS485 Data Communication |
