Single-phase Two-wire Electronic Active Energy Meter with DIN Rail
Installation
Product Description:
The meter is used to measure 50Hz or 60Hz active energy consumption
from single phase two wire AC electricity net.
The features of small size and DIN-rail mounting make it suitable
for installation in distribution boards and small standard
enclosures.
The meter is widely used in the office buildings, shopping malls,
residences, airports and metro,etc.
The meter’s LCD shows various consumption data and information.
Specification
Model | Accuracy | Reference Voltage | Current Specification | Starting Current | Insulation Performance |
YEM011JC | Class 1 | 127/230V | 5(30)A 10(50)A 20(100)A | 0.02A 0.04A 0.08A | AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
* If you need different reference voltage or current specification,
please advisory our sales personnel.
Features
1. 35mm standard DIN rail installation.
2. The meter can accurately measure and display total active energy
consumption by LCD Display.
3. LCD display 6+1 display default, also can make it 5+2 (two
decimal) dispaly.
4. Standard configuration Impulse output passive (polarity),May
select distant impulse output passive (no polarity). And contact
with all kind of AMR system conveniently,complying with standard
IEC 62053-31 and DIN 43864.
5. Two LED instructions respectively power supply state (green) and
signal of energy impulse (red)
6. Standard configuration don’t detection direction of the flow of
load current. May select automatic detection the direction of the
flow of load current. And instructions by an individual LED.
7. The meter adopts latest imported integrated-circuit exclusively
for electrical energy with digital
multiplier, which has greatly improved the dynamic working range of
the meter and make the actual
overload capacity up to more than 10 times.
8. Standard configuration type S wiring (Inlet from bottom, outlet
from top) for direct connect operation, we can also choose another
type of connection, and use CT (Product Configuration code is IC)
and PT & CT (Product Configuration code is HC) for operation.
9. Extension terminals cover is available, in order to ensure
safety.
Dimension
Wiring Diagram
Application examples:
Measurements where space is limited
Metering of heating systems or any sub-distributors
Installation in distribution without meter board or meter cabinet
With S0 interface for remote reading and involvement in energy
management systems
Industries, switch, office complexes, camping and garden equipment,
boat moorings
Recognition of "energy guzzlers"
Energy management systems, building technology
Wear monitoring for plant and machinery
