Superheated Water Pharmaceutical Autoclaves With Level Sensor And
Alarm In Chamber
Specifications
Design pressure | 0.245Mpa | Soft Water Pressure | 0.1-0.2Mpa |
Working Pressure | 0.22Mpa | Steam Source Pressure | 0.4-0.6Mpa |
Design Temperature | 139ºC | Water Source Pressure | 0.1-0.3Mpa |
Working Temperature | 134ºC | Compressed Air Pressure | 0.5-0.7Mpa |
1.Homogeneous temperature distribution because of highly engineered
water distribution into the chamber
2.Short batch time because high performance circulation pumps and
heat exchangers
3.Low media consumption because of a water storage system
4.Time or F0 based sterilization
5.Installed direct on a floor or pit mounted
6.All models are equipped with horizontal doors for easy
loading/unloading of the chamber,
easy maintenance access and safety from hot surfaces when the door
is open
Durable construction
1.A cylindrical single-wall chamber with rectangular door/s both
made entirely from 304
stainless steel providing highest corrosion resistances.
2.The doors are automated, typically of horizontal sliding motion,
powered by pneumatic
cylinders. Chamber is sealed by means of an O-ring silicone gasket,
lodged inside a machined
groove in the frame, which does not require lubrication
Hygienic design
1. Chamber and door inner surfaces are mechanically polished to Ra
≤ 0.64 μm giving
mirror appearance.
2. All components and pipe work parts such as valves, heat
exchangers, pumps, filters,
fittings, gaskets, etc. are supplied with quality certificates,
according to current standards in
sanitary installations and they are designed and installed for
proper maintenance
and long life cycles. I.e. pneumatic-operated valves, Tri-Clamp
type connections and process
tubing made of stainless steel 304
Applications
Solutions in plastic metering containers, in cans with flip-off or
threaded closures
Large volume parenterals in glass containers, rigid or semi-rigid
plastic, flexible plastic.
Safety and Ergonomic Design for Users
- The double door chambers incorporate the necessary interlocks and
each door has precaution mechanisms to ensure maximum operator
safety.
- The technical area is designed for ergonomic maintenance, with
enough access to components and ease replacement of spares without
almost using tools. Potential hot piping is insulated with chloride
free mineral wool within an external stainless steel AISI 304
sheet.
- The loading and unloading handling operations can be done either
manually or, when large and heavy loads have to be handled, by
using automatic mechanisms. The automatic loading/unloading system
consists of a bench located in front of the door, where the pallets
are placed. The pallets are then introduced by a mechanical system
below the bench
- Another alternative for big and heavy loads is to install the unit
in a pit, thus loading height is at floor level.
