Strip Chart Recorder Autoclave Sterilizer Machine With Fault
Identifications Incorportated
Specifications
1. Sanitary stainless steel piping
2. Cross-contamination or gas-tight barrier (Bioseal)
3. Own control system, specially developed for sterilization
applications (choice of world-leading PLC brands)
4. Manufactured according to intended application
guidelines/standards and country of installation
5. Project handling and products in line with current regulations
and guidelines, e.g. cGMP, etc.
Program Parameter
Cycle name | Further details | Application |
Instruments/Tools | 3 times Vacuum, expose temperature 132℃, expose time 8 min, drying
time 5 min. | Solid materials to be sterilized: ●Packaged instruments ●Empty glass containers ●Empty metal containers Porous materials to be sterilized: ●Rubber articles |
Clothing | 3 times Vacuum, expose temperature 121℃, expose time 15 min, drying
time 25 min. | Materials to be sterilized from which air can’t be easily displaced ●Textile |
User Programmable | All preset parameters can be reset; Multiple customized programs
can be set and stored by user. | Customized |
Test programs |
B-D Test | 3 times Vacuum, expose temperature 134℃, expose time 4 min, drying
time 3 min. | Test program |
Vacuum Leak Test | Test the chamber connecting parts’ tightness effect. It’s important
to ensure the sterilization effect. | Test program |
Description
Autoclave sterilizer machine sterilization relies on three (3)
parameters to eliminate microbes
and organisms: Time, temperature, and pressure. And these
parameters can be manipulated
into different cycle recipes to sterilize various types of loads.
However, the cycle requirement for
every load type—such as red bags, media, glassware, cages, animal
bedding, and pipette
tips—can vary significantly.
While the vast majority of common pharmacy and laboratory loads can
be sterilized with one of
the following three (3) basic cycles: Gravity, Vacuum (or Prevac),
and Liquids; it is important to
ensure that your sterilizer offers the cycles appropriate for all
of your load requirements.
Clients will be of particular interest to labs that are expanding
their research capabilities to mice
and rats, and need to upgrade their current sterilizer to one that
can easily accommodate
cages and waste.
Some of the key available options include:
Pass-thru configuration: Ideal for BSL-3 labs, the pass-thru option
allows for movement of
materials between the contained decontamination area and the clean
processing area.
Loading cart and transfer carriage: The loading cart is mounted on
rollers, with two stainless steel
shelves and a wheeled transfer carriage. The transfer carriage
mates to interior guide rails to
ease loading and unloading of sterilization loads up to 500 lbs.
evenly distributed.
Bioseal: For Biological Safety Level 3 installations a Bioseal can
be installed to maintain the
contamination integrity of the clean side. Utilities can be mounted
at the non-contained side
of the installation and in the front, rear or designated side of
the cabinet.
Dual Controls: For pass-thru models equipped with the controller. A
6” color touchscreen with
full operator and service functionality is provided at each end of
the sterilizer to allow operation
from both sides. Printer is located outside the containment area
unless otherwise specified.
Applications
BioPharma Series Sterilizers provide steam sterilization for
components and equipment as well
as for container closures such as rubber stoppers and plungers
which are vital to parenteral packaging.
Programming for many applications including stopper processing,
which generally clean, sterility and drying of these products that
are a functional part of the drug administration system.
Advantage
- Strong on safety
- Leading-edge construction
- Advantage of sliding door
- Numerous design options
Brochure load down from here
Medpharm medical large steam autoclave brochure.pdf
