Industrial Heating Elements Cartridge Heater Outside Connect Wire
for Mould Heating
Description
Cartridge heater is cylindrical electrical heating elements.
Protected with a stainless steel sheath, their watt density can
reach 25 W/cm2 and their operating temperature can go up to 800°C
(1472°F)
Cartridge heater is one of the electric heating elements, which is
widely used in industry mould heating. Compared with the same
heating element of high thermal, cartridge heater can save 5% of
electric materials, and heat efficiency can reach 90%.
Mostly, cartridge heater is used for heating solids such as
injection presses heating plates or various tools, it can also be
used for heating up water of gases under certain conditions. Widely
used for manufacturing plastic and rubber parts in the car industry
or in the food processing industry, etc .
Cartridge heaters are also commonly found in the chemical,
electronics, medical equipment, packing and nuclear
industriesVarious cartridge heater technologies are available. The
choice of technology will depend on technical specifications
required and the application. Unless you know exactly which product
you are looking for, we will recommend you the best solution for
your needs.
Specifications
Resistance wire | NiCr20/80 |
Material | stainless steel 304,321,316, Incoloy 800, Incoloy 840 |
Maximum Temperature | 800°C |
Standard cold length at lead exit | 0.375" |
Standard cold length at disc end | 0.25" |
Thermocouple | K or J |
Cable wire | silicone wire, metal wire, fiberglass wire, etc |
Flange/thread | M12, M14, M16, 1", 1 1/4", 1 1/2", 2",etc |
Diameter | 6-25mm |
Voltage | 110V,220V,230V or as customer's demands |
Wattage | 0.5KW to 15KW |
Water proof | IP65 |
Drawing picture
Application
a. Cartridge heater applied in mold heating has been has been very
popular in modern industrial.
b. Heating system in plastic machinery.
c. Pharmaceutical production
d. Heat Treatment Lab
e. Chemical industry and so on.
Competitive Advantage:
1. We manufacture high density cartridge heaters; Minimum diameter
can reach 3mm.
2. All lead wires are pure nickel
3. Insulating material can be resistant to the high temperature of
400 degree.
4. Our product can meet IP65 waterproof
5. We also produce Split cartridge heater.
6. We produce cartridge heater with distributed wattage.
