CCS Approved Chemical Protective Suit Class One Heavy Duty For
Marine Firefighters
Chemical protective class one ensemble for firefighters is
specially designed for fighters to protect them-self from being
damaged by chemical substances when in fire spot or in accident
spot.
RHF-1 suits will not getting flux and dropping only carbonization.
Sewing to the use of frame-resistant and adhesive strong the Nylon,
with both-sides being covering with chemical protective and
fire-resistant rubber. Both-surface chemical resistant rubberized
fabrics, then process it into the clothing and gloves in glue of
laminating then combine with a chemical protective and
fire-resistant and spike-resistant of boot to make up a set of
clothing.
Size Chart:
SIZE | S | M | L | XL |
Clothe size(cm) | 160 | 166 | 171 | 177 |
Chest(cm) | 55 | 56 | 57 | 58 |
Waist(cm) | 115 | 122 | 125 | 126 |
Boots size(cm) | 25 | 26 | 27 | 27 |
Suit body(cm) | 165－170 | 170－175 | 175－180 | 180－185 |
Requirement of main technical:
(1) main rubberized fabric
Thickness of cloth: 0.45±0.05mm
Breaking strength: ≥450N/5cm(warp and filling)
Tear strength: ≥32N
Acid resistance: It soak in 80％H2S04,60％HN0330％HCL for 1h.(liquid
highly 10mm)It is not permeate.
Alkali resistance: It soak in 6.1 mo1/LNa0H for 1h,(liquid highly
10mm) It is not permeate.
(2) Rubber boot performance: The boot of chemical protective
clothing can according to the need of customers for producing
fireproof boot or buying fireproof boot. Fireproof boot and
firefighting boot performance as follows:
Fireproof boot | Firefighting boot |
1.Boots of stab resistance:≥780N | 4.Boots of oil resistance:-2 -10% |
2.Boots of pressure resistance: ≥5000 | 5the rate of adherence ≥600 N/m |
3.Boots of leakage resistance (submerse in water with 2 hours it’s not permeate.) | 6.Boots of pressure resistance: ≥5000 |
4.intensity of adherence≥0.78kN/m | 7.after aging its elongate rate ≥75% |
Firefighting boot | 8. Boots erode resistance |
1. pull apart the rate of elongate≥750% | 9. Boots heat resistance ≤22℃ |
2.Boots impale resistance ≥900N | 10.Boots slid resistance ≥115° |
3.Bootsgrind resistance ≤0.9cm3/1.61km | 11.weight ≤1.8kg |
(3) Finished product
Furring adherence intensity ≥0.78KN/m.
Boots of Water permeability resistance (It is not permea-bility
after being eroded in15min by 5 water showers nozzle of 3L/min.
Overall weight: ≤ 8 Kg
- mode:Q/310225 FZC001-20114.
Pictures:
