Multi Function Sandwich Panel Making Machine With Double Drive
Double Roller Extruding tech
eco-friendly Mgo sandwich wall panel forming machine With 2000 SQM
larger capacity
| Item | National Standards | Testing Indexes |
| 90mm | 90mm |
| 1 | Anti-impact Capacity | ≥5 | ≥10 |
| 2 | Anti-bending damage load | ≥1.5 | ≥4 |
| 3 | Compressive strength/Mpa | ≥3.5 | ≥5 |
| 4 | Softening coefficient | ≥0.80 | ≥1 |
| 5 | Facial surface density g/cubic meters | ≤90 | ≤70 |
| 6 | Water absorption | ≤10 | ≤9 |
| 7 | Drying shrinkage% | ≤0.6 | ≤0.5 |
| 8 | Hanging force/N | ≥1000 | ≥1500 |
| 9 | Sound insulation/dB | ≥35 | ≥50 |
| 10 | Fireproof limit/h | ≥1 | ≥3 |
| 11 | Heat transfer coefficient w/m2 | ≤1.0 | ≤1.0 |
| 12 | Radioactivity limit | ≤1.0 | ≤1.0 |
| 13 | IRa(interior radiation indexes) | ≤1.0 | ≤1.0 |
| 14 | lr(exterior radiation indexes) | ≤1.0 | ≤1.0 |
Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some
inorganic
chemical materials at one time after roller-extruding. The source
of raw materials is widely and they are purchased
easily for customers.
Take specification of 1.22mX2.44mX3mm as example, the cost is 7~8
Yuan,
and the market price is generally 13~16 Yuan.
This whole production line can used to produce MGO door board, MGO
board, Sanding mgo board, MGO foam board, fireproof board, cement
board, EPS sandwich wall panel, lightweight wall panel.
It is the multi-functional production line for many kinds of modern
construction materials, is well received by clients who focus on
green environment-friendly buildings and energy-saving
constructions.
I Equipment Feature
This machine adopts the technology of double-drive
double-roller-extruding, and the product is formed once after
sizing, material feeding, spreading no-woven cloth, compounding and
repressing. The equipment runs stably with high automatic degree,
and the specification of its product can be adjusted arbitrarily.
The equipment actually realizes the industrial production-line of
new model building wall board, and the product have even and glazed
surface with high compactness. The equipment largely reduces the
labor intensity of worker and thoroughly changes many shortages of
the former casting forming with upright mould or flat mould, such
as large mould usage, low recycling rate, required electrical
heating or steam heating, single kind of product as well as the
sound insulation and heat-preserving which don’t meet the market
requirements.
II Project Feature
1. The source of the production raw materials is widely with no
regional restriction. The product is made of sawdust, straw (rice
hulls), many kinds of crop straw and inorganic material (such as
talcum powder, infusorial earth and powder coal ash) after special
technology. So this project have low production cost, small
investment and fast effectiveness.
2. The equipment has high automatic degree, simple production
technology, low labor intensity and production line, and there is
no noise and three-wastes (waste water, waste gas and waste
residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the requirements about production
technology without high temperature and high pressure.
Product Feature and Performance
Performance
Production Conditions
Wall board production line has workshop and raw material warehouse.
Workshop: over
300m2-800 m2, worker: 10-16 person; fresh water; electricity:8-20KW
5. Benefit Analysis
(I) Cost accounting
Raw material: 19-25 Yuan/ m2 (according to different thickness);
Wage: 1 Yuan/ m2
Water-electricity fee: 0.5 Yuan/ m2; Depreciation of the equipment:
0.2Yuan; Management fee: 1 Yuan/ m2
Total: 21.7 Yuan~27.70 Yuan/ m2
(II) Profit analysis: (Take the small-scale equipment as example),
production: 800 m2 per day, at
the price of 58 Yuan/ m2 to sell, and
then the profit per day is that 800 m2 ×58 Yuan/ m2－800
m2×21.7~27.70＝29040~24240 Yuan.
6. Attention
1. Sign the contract printed by Industry and Commerce Bureau.
2. Provide many kinds of certification materials about state-level
test report.
3. According to eight-hour production and automation degree, the
light quality heat-preserving
composite wall board equipment can be divided into large, middle
and small scale for your selection
. We will carry out one dragon service include technology,
equipment, installation and testing to
ensure the qualified product.
After purchased the equipment, our company will take responsibility
for trainning technical personnel until he can get the skill.
There are many professional technical personnel in our company,
they will offer consultation about the
equipment and technology as well as technical training on site for
free. And they will go to your
factory for installation and testing for free.
Welcome you to our company for a site visit, we will service for
you sincerely.
