EPS Wall Sandwich Panel Machine with High Precise Guiding Pressure
Reducing Valve Controls
EPS Wall board machine, EPS sandwich wall board making machine,
wall panel machine
1. Main feasture:
1).The machine adopts PLC and touch screen control, automatic
filling, electronic weighing, temperature
control, material level control to realize automatic production.
2). With the same machine, it can adjust the panel size and
thickness. The thickness will be from 60 to 180mm.
3).The closed constant pressure foamng barrel features of high
heating efficiency and saves stem.
4).High precise guiding pressure reducing valve controls the
temperature and steam pressure of the
closed barrel, ensuring the outcome pressure of the valve constant
and the inner temperature controlled
within ±1%, which keeps the foamed material equal and prevents the
bead agglomerate because of the
bad temperature control.
5).With photoelectric or vibration sensor to control material
level, ensuring density tolerance within ±3%.
6).The machine is equipped with fluidized bed dryer, including
drying, automatic sieving, depluming and
material conveying to silos.
7).Most components are of world-famous brands, with reliable
performance, stable quality, long service
life and low maintenance cost.
8).The machine can realize the primary and second expansion
Straw color wave roof tile forming machine can produce pantile with
all kinds of
waves and heat-preserving layer, which will be used at the roof as
the substitute
of traditional asbestos tile, color steel tile and cement tile.
There is asbestos in the
asbestos tile which include carcinogen.
Product features
The product manufactured by this equipment has following features:
fireproof,
waterproof, environmental protection and no toxicity, at the same
time it is
resistant against acid, alkali and aging. This product can be
nailed, planed, sawed
and sticked. In view of that its fireproofing grade is A, so our
product will not be
combustible when the fire is 800-1000°C.At the same time, when our
product is
fell into the water for a week, there are not the following
phenomenon such as
chalking, deformation and warp. In light of there is not glue in
the raw materials,
so there is not formaldehyde and benzene for our boards.Rich color
and never
fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high
pressure during
production processing. The board will be
formed at one time after rollerextruding under the conditions of
normal temperature
and normal pressure. This is a green environmentalprotection
project, because
that there is no waste water, waste materials and waste gas during
its production
processing. The finished board don’t need high temperature drying,
airdrying and
watering, and under the normal temperature, they will dry well
indoor.
Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and
smallscale. Our all equipment can produce board with same quality
and specification
but different production.Customers can adjust the specification of
the pantile
according to different requirements, the standard specification is
1.8mX0.72m,
the biggest length is 6 m, the thickness is 3mm~6mm generally. In
addition, this
equipment can produce the pantile with
heat-preserving layer. 
