CE Full Automatic Sandwich Partition Wall Panel Making Machine for
Construction Material
Full Automatic Sandwich Partition board Production line,Wall Panel
Making Machine
Partition Board Machinery
Product Description
Production Line for Light weight Heat-preserving Composite Wall
Board.
I Equipment Feature
This machine adopts the technology of double-drive
double-roller-extruding, and the product is formed once after
sizing, material feeding, spreading no-woven cloth,
compounding and repressing. The equipment runs stably with high
automatic degree, and the
specification of its product can be adjusted arbitrarily. The
equipment actually realizes the industrial
production-line of new model building wall board, and the product
have even and glazed surface with
high compactness. The equipment largely reduces the labor intensity
of worker and thoroughly
changes many shortages of the former casting forming with upright
mould or flat mould, such as large
mould usage, low recycling rate, required electrical heating or
steam heating, single kind of product
as well as the sound insulation and heat-preserving which don’t
meet the market requirements.
II Project Feature
1. The source of the production raw materials is widely with no
regional restriction. The product is made
of sawdust, straw (rice hulls), many kinds of crop straw and
inorganic material (such as talcum powder,
infusorial earth and powder coal ash) after special technology. So
this project have low production
cost, small investment and fast effectiveness.
2. The equipment has high automatic degree, simple production
technology, low labor intensity and
production line, and there is no noise and three-wastes (waste
water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of
chemical reaction, it can meet the
requirements about production technology without high temperature
and high pressure.
Product Feature and Performance
Performance
1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
3 | Anti-breaking load | ≥1400N | 5640N |
4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
6 | Thermal bridges area ratio | ≤8% | 2.22% |
7 | Sound insulation Index |
| 36dB |
8 | Radioactivity |
| None |
III Feature
1. Anti-earthquake with light weight: In view of its weight per
unit area is only 1/10 of red brick wall, the product has good
anti-earthquake performance. It can be used at low-rise building
and high-rise building, and it is preferred to be used at workshop
with steel frame structure. It can replace the color steel plate
with its better performance.
2. Fast and convenient operation: It can be installed by board or
combination with the dry method, and the product can be nailed,
cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and
industrial wastes, so the production cost is low. With the low load
of girder and short construction period, it can reduce over 20% of
engineering cost after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production
processing need no high temperature and high pressure. Being a
green environmental-protection energy-saving building materials,
the product has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area: Under the same condition of
heat-preserving and sound insulation, with the thinner plate, the
product can increase over 10% usage area after compared with the
same building.
6. Having the following features: fireproofing, water-proof,
anti-impact, acid & alkali resistant and anti-aging.
