Water supply and Drainage use Fiberglass Profiles reinforced plastic Grid

Supply various size of Fiberglass Profiles reinforced plastic Grid.

An overview of the

FRP gratings based on thermosetting resin as the matrix and glass fiber roving as reinforcing material,

through the glass fiber braiding, resin casting molding whole, make with many rules of distribution of

rectangular, square, space of FRP sheets, the mechanical characteristics of two-way bearing with vertical

and horizontal directions.Divided into molding FRP gratings and pultrusion grille.

Product differences

Glass fiber reinforced plastic grille due to material differences, molding process, bearing capacity, the

different functional requirements, lead to grille phyletic and various, specific classification methods are:
1) According to the materials, flame retardant, corrosion resistant gratings, regular grid
2) According to the molding process points:, pultrusion molding gratings
3) According to the bearing capacity points: different porosity, the thickness of the grid
4) According to the requirements of function points: transparent grille, leakproof, block gratings, isolation,

walkway grating, insulating gratings, etc.
No matter what kind of pattern classification, according to the structural type mainly has: and pultrusion

molding gratings.

Main Performance

Product features

1) The corrosion of various chemical medium resistance, never rust, long service life and free maintenance
Grating is a kind of non-metallic composite material, different from the traditional metal grille, its in the

chemical medium will not occur under the action of electrochemical corrosion and rust, won't make the

material structure is damaged, do not need to undertake regular or irregular inspection, maintenance,

and not like the metal grille due to the presence of many invisible factors, cause a series of unexpected

accidents.At the same time, it also differs from that of the material such as wood rot, mildew to change

happens, is one of the traditional iron, wood, cement and other materials of upgrading products.


2)

Light weight, high strength, and is convenient for cutting, installation.
Because it is by the resin and glass fiber composite, its density is small, only a quarter of the iron,

two-thirds of the aluminum, but its relative strength is higher than that of the metal.Its light weight, can

greatly reduce based support, thus reducing the material cost of the project.Its cutting easy installation,

without hot and large-scale lifting equipment, only a small amount of manual and electric tools, makes the

installation costs are greatly reduced.


3)

Can design sex is strong, flexible and varied size, size stability
Can be customized products according to customer's requirements, such as different perforated size, the

appearance of different size, different load requirements, etc.Can meet the requirements of customers to

the greatest extent, and can be cut caused losses to a minimum, to save costs for our customers.


4)

Reduce staff fatigue, enhance the comfort, improve work efficiency
FRP belongs to the flexible material has slight elasticity, people walk or stand on FRP molded grating

process, due to the elastic grille, can rise to adjust human physiology to bend, changing muscle stress,

increase the human nervous system coordination, alleviate the pressure of the human body.

Display

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.