Automated Toll Barrier Gate Arm Security Gates For Smart Parking System
1. Toll Barrier Gate Manual release
2. Toll Barrier Gate Machine core with compression spring, effectively avoids the
accidents caused by spring breaking
3. Die-casting aluminum alloy motor, precision and good at thermal
radiating
4. Toll Barrier Gate Motor cooling fan, solving the problem of heat-protection
5. Double safety limit switches (photo electricity limit switch/motor
memory sensor)
6. Reversing on obstacle
7. Auto-closing
8. Support the INFRARER PHTOCELL for anti-bumping function (optional)
9. Support the external and internal VEHICLE LOOP DETECTOR (optional)
10. Toll Barrier Gate Traffic light interface
11. Wire control (switch signal)/ Remote control (418MHZ)
12. RS485 communication module (optional)
Toll Barrier Gate Model Selection and Differences
Toll Barrier Gate Specifications
Toll Barrier Gate Model | WST1211 |
Toll Barrier Gate Working Temperature | -40℃～+75℃ |
Toll Barrier Gate Voltage | 220V±10%, 110V±10%, 50/60HZ |
Toll Barrier Gate Rated power | 80W |
Toll Barrier Gate Relative humidity | ≤90% |
Toll Barrier Gate Remote control distance | ≥30m |
Toll Barrier Gate Net weight | 48kgs |
Toll Barrier Gate Speed | 1S,1.8S,3S, 6S |
Toll Barrier Gate Max boom length | 6 meters |
Toll Barrier Gate Motor Rotational speed | 1400rmp |
Toll Barrier Gate Protection Degree | IP44 |
Communication with customers
1) Q: Connected power and pressed the open/close button but the
traffic barrier gate did not action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the
control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the Toll Barrier Gate will move but even when it is in the right position, the motor
still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The motor running but the traffic barrier gate arm is not in
action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or
vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, traffic barrier gate arm cannot reach
the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm
is at 90° vertical position if the master rod covers slave one; when the arm
is at 180° horizontal position if the master rod and slave one are in the
same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal
|
Why choose us?
1. One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system were destroyed by the wrong
installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and service
article belongs to the production factory.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
