80MPA YAMAHA GASOLINE ENGINE HYDRAULIC PUMP USED ALONG WITH HYDRAULIC COMPRESSOR FOR CRIMPING ACSR

80Mpa Yamaha Gasoline Engine Hydraulic Pump Used Along With Hydraulic Compressor For Crimping ACSR

Application

Application of Yamaha Hydraulic Pump: to provide power for the cutting tool, the hydraulic compressor, punching machine

and other construction machinery, which is operated in the wild field in electric power, railway, rescue, construction and other industries.

Specifications

Engine:Yamaha Gasoline Engine

Fuel:gasoline

Stroke:4 stroke

Cylinder: Single Cylinder

Cold Style: Air-cooled

Start: Kick Start

Displacement: 250cc

Starting System: Recoil/Electric Key start

Features

1 Easy to operate and high safty

2 Precise Machining Technique

3 Long Life of the Machine

4 Delicate and Beautiful Appearance Design

5 Broader Applicable Scope

6 Good quality and less malfunction

Technical Data for High Pressure Gasoline Hydraulic Pump

DAILY MAINTENANCE

The life,reliablity,and safety of the tool is dependent on proper maintenance.Clean all surfaces including

head,die seat,ram,and body.

Inspect for wear and damage.Worn or damaged parts may malfunction during operation.

All parts must be replaced with new parts if signs of wear or damage are evident.

Keep Lable Set clean and legible.Replace decales when necessary.

Manufacturer recommends regular testing for proper pressure and operation.

Test at least every 6 months,test more often under heavy usage.

GENERAL INFORMATION

1. IMPORTANT:Extreme caution should be used to prevent the entry of this material into th unit.Wipe off all

couplings and fittings before connecting to unit.Be sure that any pump to be used with the compression

tool is clean and free of dirt and contamminants.

2. PERIODIC MAINTENANCE:Occasionally lubricate die stop plunger assemblies.Use of a molybdenum

disulfide grease is recommended.Pull pin and pivot pin assemblies should also be cleaned and

lubricated to prevent sticking.

3. Oil LEAKAGE:A small amount of seepage from the piston and pump seals is normal and necessary

to aid in the lubrication of the moving parts.Excessive leakage may indicate the need for seal

replacement and should be performed only by an authorized reliable service center

Practical Application

Changshu Xinya Machinery Manufacturing Co., Ltd.is located in the beautiful and rich Chinese historical and cultural city - Changshu, Jiangsu. It is on the east of Shanghai, on the southern edge of Suzhou, west of Wuxi, north of the Yangtze River.It is convenient for transportation.

Changshu Xinya Machinery Manufacturing Co., Ltd. is founded in the eighties of last century, specializing in the production of various electrical equipment, forklift mast and so on. And in 2010,we passed through the ISO9001: 2000 and BV certification.

With support of customers, our products  have sold all over the word. According to the needs of the majority of users, we will increase the investment in science and technology,constantly develop new products, strengthen and improve product performance to meet the requirements of our customers.

Our main products are 1 ton, 2 tons, 3 tons, 5 tons, 8 tons JJM series cable pulling winch, hydraulic tensioner,hydraulic puller,cable laying euiqpments,high pressure hydraulic pump with hydraulic crimping tools,come along clamp,stringing pulley, cable roller and cable drum trailer, steel bar, aluminum alloy gin pole , And other power construction equipment and a variety of large tonnage forklift mast and a variety of special requirements of non-standard gantry.

Manufacturing process is complete, strong technical force, processing capacity is complete, finished products are strictly standardized technical quality testing, a sound quality control and after-sales service system, formed a certain scale of power equipment production capacity. Our existing variety of equipment are more than 80 sets, processing capacity, more sophisticated equipment (processing centers and CNC equipment 15 sets) to ensure product quality.