Microwave Owen Silicone Orings High Tensile Strength 88 LBS Tear
Resistance
Silicone O ring
Abbreviation : silicone
ASTM D-2000 classification: FC,FE,CE
Military(Mil-Std417) : TA
Chemical Definition : polysiloxane
Durometer-Range (Shore A) : 30-90
Tensile Range (P.S.I) :2 00-1500
Elongation (Max.%) : 700
Compression Set: Good
Resilience- Rebound: Good
Abrasion Resistance: Fair to poor
Tear Resistance: poor
Solvent Resistance: poor
Oil Resistance: Fair to poor
Temperature Usage ( °C ) :-150~450
Aging Weather- Sunlight: Excellent
Adhesion To Metals: Good
Advantage:
1. after modulating formula, the tensile strength up to 1500 psi,
and tear resistance up to 88 LBS.
2. Good elasticity and good compression deformation.
3. good resistance to neutral solvent.
4. excellent heat resistance.
5. With excellent cold resistance.
6. with excellent resistance to erosion of ozone and oxides .
Disadvantage:
1. Does not recommend is suitable for most concentrated solvent,
oil, concentrated acid after dilute sodium hydroxide
Usage:
Appliance: electric kettle,electric iron,Microwave owen,etc
Keypad,heat shock in DVD,cable connector
Material Description: Silicone rubbers are widely used in industry and there are
multiple formulations. Silicone rubbers are often one or two part
polymers, and may contain fillers to improve properties or reduce
cost. Silicone rubber is generally non-reactive, stable, and
resistant to extreme environments and temperatures from -55 °C to
+300 °C while still maintaining its useful properties. Due to these
properties and its ease of manufacturing and shaping, silicone
rubber is used in silicone gaskets, seals and orings and can be
found in a wide variety of products such as:
- Automotive applications
- Many cooking, baking, and food storage products
- Apparel including undergarments, sportswear, and footwear
- Electronics equipment
- Home repair and hardware
- A host of unseen applications.
Silicone’s temperature tolerance maintains a lack of brittleness
below freezing and excellent tolerance of temperatures in excess of
150 °C (302 °F).
ASTM D1418 Designation: MQ, PMQ, VMQ, PVMQ
ASTM D2000/SAE J200 Type, Class: FC, FE, GE
Apple Compound Designation: SL
Standard Color: Red
Key Use(s): Static seals in extreme temperature situations. Seals for medical
devices, compatible with FDA regulations.
Temperature Range:
Standard Compound: -85° to +400°F
Hardness (Shore A): 20 to 90
Features: Phenyl (PVMQ) based silicones can perform to -85°F. New polymers
can take short term to 600°F.
Limitations: Generally, low abrasion and tear resistance, and high friction
characteristics preclude silicones from effectively sealing some
dynamic applications. Silicones are also highly permeable to gases
and are generally not recommended for exposure to ketones
(MEK,acetone) or concentrated acids.
70 TEST REPORT
Test Requested:As specified by clients,to determine total
extractive residues from Rubber articles intended for repeated use
in contact with food for compliance with Food and Drug
Administration Regulations.
Test Method:With reference to US FDA 21 CFR 177.2600.
| Simulant Used | Time | Temperature | Max.Permissible Limit | Result of 001 | Comment |
| Distilled water | 7.0hr(s) | Reflux temperature | 20mg/sq.in | <0.5mg/sq.in | PASS |
| Succeeding Extraction | 2.0hr(s) | Reflux temperature | 1mg/sq.in | <0.5mg/sq.in | PASS |
| n-Hexane | 7.0hr(s) | Reflux temperature | 175mg/sq.in | 5.0mg/sq.in | PASS |
| Succeeding Extraction | 2.0hr(s) | Reflux temperature | 4mg/sq.in | <0.5mg/sq.in | PASS |
