Plastic 25mm DC Small Cooling Fans High Temperature 10mm Thick
Brushless axial dc fan 20mm, low noise and long life expectancy,
are widely used in the computer information technology, network
communications, as well as industrial production equipment, medical
equipment, home appliances, etc.
Description:
● Brushless DC Fan, Axial DC Fan, DC Motor Fan,CPU Fan, Computer
case fan, laptop fan, PWM Fan, FG cooling fan, LED Digital signage
● Various Size
● High speed , Middle speed, Low speed
● Plastic Frame or Die-Cast Aluminum Frame and Plastic impeller
● 5 blades 7 blades or 9 blades
● 5V DC 12V DC 24V DC or 48V DC
● Ball bearing or Sleeve bearing or Hydraulic bearing
● Terminal or Lead wire
● Waterproof explosion proof or high proof are can be satisfied.
Important Note:
Rated Current: Rated Current shall be measured after 3 minutes of
continuos rotation at rated voltage.
Rated Speed: Rated Speed shall be measured after 3 minutes of
continuos rotation at rated voltage
Start Voltage: The voltage which is able to start the fan to
operate by suddenly switching “ON”
Dropping test standard: Drop a minimum packing box in a height of
30 cm for perpendicular free falling motion to the surface of
wooden plate of 10 cm. After test, connect the fan to the power,
the fan still in normal operation.
A. (General Specification)
ITEM | Specification Condition |
01 | Part No. | MX2510ABH1 |
02 | Dimension | 25×25×10mm |
03 | Rated Voltage | 5 VDC |
04 | Start-up Voltage | 3.5VDC |
05 | Operating Voltage | 3.5~5.5VDC | a.Rated Voltage |
06 | Rated Speed | 8000rpm | ±20% | b. 25℃ |
07 | Rated Current | 0.05A | ±15% | c. 65% RH |
08 | Rated Power | 0.25W | d. Measured after 5 Mins |
09 | Max Airflow | 0.58 | CFM | a. PQ Measurement Apparatus : (LW9266-SR) b. Standard : AMCA c. Rated Voltage d. Rated Current
|
0.02 | m3/min |
10 | Max Static Pressure | 0.04 | Inch-H2O |
1.02 | mm-H2O |
11 | Life Expectancy | 30000hrs at 40℃ | a.L10 at Conf. Level 90% b.Rated Voltage |
12 | Noise Level | 22dB | a.Rated Voltage b.Non-Echo Chamber c.Standard:CNS 8753/ISO3744 d.Test Condition:ISO 7779 e.Distance: 1.0M |
13 | No. of Pole | 4 Poles |
14 | Rotating Direction | Clockwise(From Label side) |
B: Model Specifications:
| Model | Bearing Type | Rated Voltage | Operating Voltage | Input Current | Input Power | Speed | Max Air Flow | Max Static Pressure | Noise | Weight |
|
| MX2507AB(S)H5 | B.S | 5 | 2.8-6.0 | 0.18 | 0.90 | 12000 | 1.97 | 0.06 | 0.16 | 39.03 | 30.00 | 5.00 |
| MX2507AB(S)M5 | B.S | 5 | 2.8-6.0 | 0.15 | 0.75 | 10000 | 1.57 | 0.04 | 0.11 | 26.48 | 24.00 | 5.00 |
| MX2507AB(S)L5 | B.S | 5 | 2.8-6.0 | 0.12 | 0.60 | 8000 | 1.15 | 0.03 | 0.07 | 16.38 | 21.00 | 5.00 |
| MX2507AB(S)D5 | B.S | 5 | 2.8-6.0 | 0.07 | 0.35 | 6000 | 0.69 | 0.02 | 0.03 | 7.16 | 18.00 | 5.00 |
| MX2507AB(S)H1 | B.S | 12 | 7.0-13.8 | 0.07 | 0.84 | 12000 | 1.97 | 0.06 | 0.16 | 39.03 | 30.00 | 5.00 |
| MX2507AB(S)M1 | B.S | 12 | 7.0-13.8 | 0.05 | 0.60 | 10000 | 1.57 | 0.04 | 0.11 | 26.48 | 24.00 | 5.00 |
| MX2507AB(S)L1 | B.S | 12 | 7.0-13.8 | 0.04 | 0.48 | 8000 | 1.15 | 0.03 | 0.07 | 16.38 | 21.00 | 5.00 |
C: Electrical Specification:
ITEM |
| Specification. Condition |
Locked Rotor Protection | □ | Safety Condition |
■
| Auto power off after locked at rated voltage for 1sec
After auto power off ,circuit attempt restart in 2 to 6sec |
Polarity Protection | ■ | Open circuit when Vcc&GND are exchanged |
□ | Circuit won’t be burned within 5 seconds when Vcc &GND are
exchanged |
Insulation Resistance | 10MΩ Between unshielded wire and frame at 500VDC/min |
Dielectric Strength | 5mA Max/ Measured b/w lead wire(+)and frame at 500VAC/min |
Special Function | □ | Soft Start
5s (0 to Max speed) | □ | Current Limiter |
D. (Main Materials, Parts Specification)
Bearing | ■(Dual Ball Bearing) | □ | (Sleeve Bearing) |
Frame | ■ | PBT of UL94V-0. | □ | Die-cast Aluminum Alloy |
Impeller | ■ | PBT of UL94V-0. | □ | Steel |
Bobbin | PBT of UL94V-0. |
Lead Wire | ■ | Red(+) | ■ | Black(-) | □ | Blue(PWM) | UL 1571 28# |
□ | Yellow(FG) | □ | White(RD) | 2 wires 100±10mm |
Connector | No |
Tube | No |
Dimensions (Unit:mm)
About Our Company
1. As a professional manufacturer, we specialize in Brushless
DC&AC cooling fans and CPU coolers for over 10 years.
2. Our products are extensively applied to all kinds of
refrigeration equipments, air conditioner, cooling and ventilation
instruments.
3. Customized design is available.
4. OEM &ODM service are welcome.
5.Factory qualification with CE,UL,ROHS,FCC,TUV.
