BT30 / 40 Series End Mill Holders SDC Slim Chuck With Minor
Diameter
Product Description:
-Process machine : CNC Turning center
-Material: JIS SNCM220
-The small head diameter minimizes interference.
- It is easy to operate, for both assembling and disassembling, all
you need is an ordinary hexagonal spanner.
- Accuracy: T.I.R. <0.005mm (Length 4D)
- Standard balanced by designed(12000rpm/G6.3)
- Fine balancing can be customed on demand (25000rpm/G2.5)
USE:
For deep hole processing.
Product Advantage :
Good Surface finish , Increased feed rate
Layers with high heat resistance , can be high-speed processing
Grain size carbon tungsten has high toughness, ALTIN coating , high
wear-resistance , special use for high speed cutting of CNC milling
machine , also can increase the smoothness , reduce the rubbing
coefficient m and improve the lathe efficiency m save more
production time
Tool Rigidity and good chip discharge , the most suitable for
high-precision three- dimensional mold machining.
Factory dvantage:
More than five years production experence
Have more than 20 sets of CNC machine center
Large in stock qty
Made from 100% virgin raw material
Everyone goods go through strict quality inspection
Specifications:
| Model No. | Clamping Range | L | D | Fig▲ | Collect Type |
| BT30-SDC6-60 | 3-6 | 60 | 13 | 1 | SDC6 |
| BT30-SDC6-90 | 3-6 | 90 | 13 | 1 | SDC6 |
| BT40-SDC6-60 | 3-6 | 60 | 13 | 1 | SDC6 |
| BT40-SDC6-90 | 3-6 | 90 | 13 | 1 | SDC6 |
| BT40-SDC6-120 | 3-6 | 120 | 13 | 1 | SDC6 |
| BT40-SDC6-150 | 3-6 | 150 | 13 | 1 | SDC6 |
| BT40-SDC8-90 | 3-8 | 90 | 22 | 1 | SDC8 |
| BT40-SDC8-120 | 3-8 | 120 | 22 | 1 | SDC8 |
| BT40-SDC12-70 | 3-12 | 70 | 34 | 2 | SDC12 |
| BT40-SDC12-90 | 3-12 | 90 | 34 | 2 | SDC12 |
| | | | | Unit:mm |
▲As below:
Products display:
