Fully Automatic Heatless Compressed Regenerative Desiccant Air
Dryer
Descriptions
SINCE Series Heatless compressed Air Dryer is a kind of simple,
reliable and economical method for
removing water vapor from compressed air. The normal outlet
pressure dew point is -40℃, lowest
pressure dew point can be -70℃.
the SINCE Series Heatless compressed Air Dryer is ideal for
applications where compressed air lines
are exposed to blew zero ambient temperatures, or where special
processes require air at an extremely
low relative humidity. This unit provides instrument quality air
and is designed for maximum reliability
and long, trouble-free service.
the SINCE Series Heatless regenerative Air Dryer is based on
pressure-swing
adsorption technology. There are two desiccant towers filled with
activated alumina, as saturated air
flows up through the tower , its moisture content adheres to the
surface of the activated alumina beads.
The dry air is then discharged from the tower into the distribution
system.
After 5 minutes of operation on one tower the flow is switched to
the other tower through the use of
a timed system of directional valves. A portion of dried compressed
air is diverted through an orifice,
expanded to atmospheric pressure, and directed into the
regenerating tower, where the moisture
accumulated during the drying cycle is stripped off and purged to
the atmosphere.Standard Features
Reliable Timed controller Fieldproven over time, this design and
technology maintain precise control
over all switching and purge valve functions.
High quality desiccant High quality, extra quantities of activated
alumina is respectively filled in each
tower.
Pressure Gauges Located on each tower, provide visual indication of
pressure during drying and
regeneration processes.
Product clean&pure compressed air
Pressure:≤9bar
Normal pressure dew point:≤－40 to－70℃
Capacity :5-5000Nm3/H
Application:
1. Metallurgy: For anneal protection, agglomeration protection,
furnace washing and blowing ,etc.
Used in fields such as metal heating treatment, powder metallurgy,
magnetic material,copper process,
metallic mesh, galvanized wire, semiconductor, etc.
2. Chemical and new material industries: For chemical material gas,
pipeline blowing, gas replacement,
gas protection, product transport, etc. Used in fields such as
chemical ,urethane elastic fiber, rubber,
plastic, tyre, polyurethane, biological technology, intermediate,
etc.
3.Electronic industry: For encapsulation, agglomeration, anneal,
deoxygenation, storage of electronic
products. Used in fields such as peak welding, circumfluence
welding, crystal, piezoelectricity, electronic
porcelain, electronic copper tape, battery, electronic alloy
material, etc.
Why they always choose SINCE?
Many years of experience and expertise in manufacturing and
supplying gas plants;
,CCS,TS certified company for quality gas plants and best after
-sale services; SINCE is the seldom
company who got ,TS (Manufacture License of special equipment)
CCS(CHINA CLASSIFICATION SOCIETY) certificate,SINCE also can
manufacture marine nitrogen
generator.
Excellent infrastructure set up teamed by experienced and qualified
engineers.
Sophisticated and developed R&D wing in assistance for
installation and use of plants.
