Two-Component High Thermal Conductivity Epoxy Resin Glue Compound
For Electronic Components Encapsulation
TIETM280-12AB Series is a two-component, high thermal conductive, low
temperature cured, long pot life, fire resistant Silica encapsulant
glue. lt is design for potting of capacitors and electrical
devices.Their flexibility and elasticity make them suited to the
coating of the very uneven surfaces.Heat can transmit to the metal
housing or dissipation plate from the separate elements or even the
entire PCB, which in effect enhances the efficiency and life-time
of the heat-generating electronic components.
TIE280-12AB-Series-Datasheet (2).pdf
Features
> Good thermal conductive: 1.2W/mK
> Excellent insulation and smoothly sourface.
> Low shrinkage
> Low viscosity, expediting air releaseed.
> Excellent in solvents and water proof.
> Longer life time.
> Excellent thermal shock efficiecy and impact resistance
Application
>To potting LED Lighting heat spreader and power- driver.
>Ferrite cements; tip type LED; good cementation to aromatic
polyester
>Relay sealant; Good adhesion to rubber, ceramics,PCB and
plastics
>Power transformers and coils; Potting capacitors; Potting of
small electrical devices
>Adhesion to metal glass and plastic;LCD & substrates adhesion;
Coating and sealant; Coil ; IGBTS;Transformer; Fire retardant
>Optical / medical component adhesive
| Typical Properties of TIETM280-12AB Series |
| Typical Uncured Material |
| TIETM280-12A(Resin) | Mixing ratio (weight ratio)
A:=1 :1 |
| Color | Black |
| Viscosity @25℃ Brookfield | 15000 cPs | Viscosity @25℃ Brookfield | 10000 cPs |
| Operating time (@25℃) | 45 mins |
| Shelf life @25℃ in sealed | 12 months | specific Gravity | 1.6 g/cc |
| Mixture Color | Black |
| TIE280-12B(Hardener) | Cure Schedule |
| Color | Black | Cure at 25C | 3 hrs |
| Viscosity @25℃ Brookfield | 7000 cPs |
| Shelf life @25℃ in sealed container | 12 months | Cure at 7o°c | 30 mins |
| Cured Properties |
| Hardness @25℃ | 85 Shore D |
| Operating temperature | -40℃ ~160℃ |
| Glass transition temperature Tg | 92℃ |
| Rate of tension | 0.10% |
| Coefficient of thermal expansion, /℃ | 3.0x 10^(-5) |
| Fire resistance UL | 94 V-0 |
| Moisture absorption % wt gain 24 hours water immersion @25℃ | <0.1% |
| Thermal Conductivity | 1.2 W/m-K |
| Dielectric Breakdown Voltage | 300 volts / mil |
| Dielectric Constant@1MHz | 4.2 |
| volume resistivity, ohm-cm @ 25℃ | 3.0x 10^13 |
Product packaging:
1KG A/B for each tank.
5KG A/B each.
10KG A/B each.
Company profile
Ziitek company is a high-tech enterprise which dedicated to the
R&D, manufacture and sales of the thermal interface materials
(TIMs). We have rich experiences in this field which can support
you the latest, most effective and one -step thermal management
solutions. We have many advanced production equipments,full test
equipments and fully automatic coating production lines which can
support the production for high performance thermal silicone pad,
thermal graphite sheet/ film, thermal double-sided tape, thermal
insulation pad, thermal ceramic pad, phase change material, thermal
grease etc. UL94 V-0, SGS and ROHS are compliant.
Ziitek Culture
Quality :
Do it right the first time, total quality control
Effectiveness:
Work precisely and thoroughly for effectiveness
Service:
Quick response, On time delivery and Excellent service
Team work:
Complete teamwork, including sales team, Marketing team,
engineering team, R&D team, Manufacturing team, logistics team.
All is for supporting and servicing a satisfy service for
customers.
