Reliable low price manufacturer various types of tungsten carbide
insert
Tungsten carbide inserts
1, High hardness (8~93HRA, equal 69~81 HRC)
2, Good hot hardness (can reach 900~1000°C, keep 60HRC)
3, Excellent wear resistance
4, Increase the cutting speed
5, Improve production efficiency
6, Shorten the production cyle.
Recommended cutting parameters of carbide turning inserts:
| Workpiece material | Range of machining | Grade | Recommended cutting speed(m/min) |
| P | Steel | For finishing | YBC151 | 180-460 |
| YBC152 | 220-500 |
| For semi-finishing | YBC251 | 160-440 |
| YBC252 | 180-480 |
| For roughing | YBC351 | 130-380 |
| M | Stainless steel | For finishing
For semi-finishing
For roughing | YBM151
YBM251
YBM253 | 110-280 |
| K | Cast iron | For finishing | YBD052 | 200-500 |
| YBD102 | 200-480 |
| For semi-finishing | YBD151 | 180-450 |
| YBD152 | 190-450 |
| For roughing | YBD252 | 150-380 |
| YBC151 | High wear resistance of the matrix and MT-TiCN, thick Al2O3 and TiN
coating. |
| YBC152 | Thick TiCN and Al2O3 coating |
| YBC251 | tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| YBC252 | Tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| YBC351 | Tough matrix of good edge security and MT-TiCN, thick Al2O3 and TiN
coating. |
| YBG102 | nc-TiAN coating and fine-grained matrix. |
| YBG202 | nc-TiAN coating and fine-grained matrix. |
| YBG205 | Added abrasion resistance and high temperature rare elements
ultrafine TiAlN based nano-coating. High layer hardness and
excellent resistance to high temperature provide effective
protection for the cutting edge. |
| YBG302 | nc-TiAN coating and flexible cemented carbide matrix. |
| YBM151 | Special organizational structure and TiCN, thin Al2O3 and TiN
coating. |
| YBM251 | Good toughness and strength matrix and TiCN, thin Al2O3 and TiN
coating. |
| YBM253 | With the advance extra fine grain nanometer coating technology,
match up with the high toughness gradient matrix. |
| YBD052 | CVD coating(extra thick Al2O3 & thick TiCN), hard matrix. |
| YBD102 | CVD coating (thick Al2O3 & thick TiCN) , hard matrix. |
| YBD152 | CVD coating (thick Al2O3 & thick TiCN), hard matrix, it is
anti-stripping. |
| YBD252 | CVD coating (middle thick Al2O3 & thick TiCN), hard matrix. |
| YNG151 | Uniform particle refining organizational ceramal alloy,
homogenizing organizational & ring form phase structure, Strengthen
bond phase,grain boundary composition design. |
| YNG151C | Physics weather deposit (PVD) coating, high toughness ceramal
matrix. |
| YD101 | Fine particle hardness phase WC and bond phase Co. |
| YD201 | Middle particle hardness phase WC and bond phase Co. |
Application
Application of CNC tungsten carbide turning inserts/ Carbide
inserts/Tungsten carbide inserts :
Suitable for hardened steel , grey cast iron , chill cast iron,
stainless steel , powder matellurgy work piece, thermal spray coating work piece and
aluminum ,used for finishing or semi-finishing.
Commonly used models: CNMG, DNMX, SNMG, DNMM, SNMM, TNMM, VNMG,
TNMG, CCMT, WCMX, DNMG, SNUN, TNGA, WNMG, RNMG etc.
Zhuzhou Mingri Cemented Carbide Co., Ltd. produce an extensive
range of tungsten carbide grades inhouse including the popular ISO
application grades of K05,K10,K20,K30,K40,P10,P20 & P30/40, as well
as numerous special Cobalt and also Nickel binder tungsten carbide
grades for use in corrosine resistant applictions.
Our production are exported to UK, European, Japan, Taiwan and
South-east Asia etc.
