ISO9001 14001 Shield Cutter Tungsten Carbide BladeTips for Mining
Description:
A tunnel boring machine (TBM) is a machine used to excavate tunnels
with a circular cross section through
a variety of soil and rock strata. There have a very big circle
blade in the front of tunnel boring machine equipped
with various kinds of cutters, in order to promote stable and
longer lasting life of application, we have research and
developed special tungsten carbide materials suited to your
application.
The TBM technology is mainly used in underground ming and traffic
tunnelling like metro, railway and road tunneling.
Grade and Applications:
Grade | Density | T.R.S | Hardness | Performance & application recommended |
|
g/cm3 | MPα | HRA |
MK4 | 15.1 | 1800 | 90.0 | Mainly used as small buttons for percussion bits to cut soft and medium hard formations. |
MK6 | 14.9 | 2000 | 90.5 | For coring crowns, electric coal drill bits, coal cutting picks,
oil cone bits and scraping knife bits, usd in geological prospecting, coal mining and oil well boring. |
MK8 | 14.7 | 2400 | 89.7 | For coring crowns, electric coal drill bits, coal cutting picks,
cone drill bits and scraping knife bits, used in geological prospecting,
coal mining and oil well boring. |
MK10 | 14.7 | 2450 | 88.5 | Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and
medium hard formations. |
MK15 | 14.6 | 2450 | 87.8 | Suitable to strips, conical buttons for rotary
percussion-resistant, geological prospecting buttons, cut soft and medium hard formations. |
MK20 | 14.4 | 2550 | 87.0 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
MK25 | 14.5 | 2600 | 87.5 | Primarily for the buttons and inserts of rotary percussion bits to
cut medium hard and very hard formations. |
MK30 | 14.4 | 2600 | 87.0 | Largely for the inserts and buttons of percussion bits and tricone
bits to cut medium-hard, hard, and very hard formations. |
MK40 | 14.2 | 2650 | 86.5 | Predominatly for the buttons of tricone bits and inserts of rotary percussion bits to cut hard and vey hard formations. |
MK50 | 14.0 | 2700 | 86.0 | For oil cone drill bits, for medium soft and medium -hard rocks. |
MK60 | 14.0 | 2500 | 87.0 | Good strength and less wear resistance, for bits of rotary hammer rock drills and heavy rock drills, for hard and very hard rocks. |
Other grades may be offered by customers' requirements
Competitive Advantage:
1. Expertise in tungsten carbide for 15 years, we can assit you in
choosing the optimum grade for your job.
2. We produce only with advanced tungsten carbide material to
ensure high level of quality
3.You're guarranteed to find the right one for your application
with various grade and types available
4.All our product are in-house made under strict quality controlled
conditions.
1. All raw materials are tested in terms of density, hardness and
T.R.S before use.
2. Every piece of product goes through in-process and final
inspection.
3. Every batch of product can be traced.
4. 100% of our products pass final inspection before being put on
the market.
