0 . 5 Inch DC Mini Black 3D Printer Cooling Fan With Low Noise
0 . 5 inch DC mini axial fan , low noise and long life expectancy ,
is widely used in cooling electronic equipment with micro space
such as smartphone , monitoring system , PSP , laptop , tablet PC ,
XBOX / PS4 / Wii etc .
Competitive Advantage :
* Qualified , cost effective and easily operated
* Small in shape , have compact structure
* CE , Rohs
* Competitive Pricing
* Keep Investing and Developing In New Products
* The Most Advanced Testing and Measuring Equipment
* On-Time Delivery
*** WE CAN CUSTOMIZE AS YOUR REQUIREMENT ***
Specification and Features
| SPECIFICATION |
| Model Number | MX1504ANM5 |
| Product Name | Ultra-low Power Micro Axial Fan |
| Bearing | Axially-grooved Bearing |
Rated Voltage
(VDC) | 2.4 V |
| Operating Voltage (VDC) | 2.4 ~ 3.3 V |
Rated Current
(mA) | 8 |
| Rotation Speed (RPM) | 5000 |
Air Flow
(CFM) | 0 . 38 | 0 . 57 |
| Static Pressure (mmAq) | 2.14% | 4.73 |
Noise Level
(dB(A)) | 25 | - 35 |
| Insulation Resistance | 10MEGA. Ω Min. at 500VDC (between frame and (+) terminal) |
| Dielectric Strength | 5mA Max. at 500VAC , 60Hz , One Minute (between frame and (+)
terminal) |
| Life Expectancy | 20,000 hours at 45℃ |
Dimensions
Fan Performance Curve
Main Parts and Materials List
| Name of Part | Integrated Hall IC |
| Lead wire | UL1571 AWG#32 |
| Cover | SUS 304 |
| Yoke | S.P.C.C. |
| Fan Blade | L.C.P. (UL94V-0) |
| Shaft | SUS 420F |
| Magnet | Rare earth magnet |
| Axial-grooved Bearing | Cu-based composite powder |
| PCB | FR4 |
| Coil | PSW thermosetting copper wire |
| Frame | L.C.P. (UL94V-0) |
Temperature Test
Test Equipment :
A . Temperature & Humidity Chamber
B . Integrated Monitoring Software/Hardware
C . PC
Test conditions:
A . DC voltage setup – 2 . 4V
B . All test samples, No . 1 to No . 4 , are placed horizontally .
C . The electrical functions, appearances and structures of all
test samples should remain
normal throughout the test .
Burn - In test
Test Equipment:
A . Power supply
B . UPS system
C . Thermometer & Hydrometer
Test conditions:
A . In open space and under ambient temperature .
B . DC voltage setup – 2 . 4V
C . Set the test time of continuous operation to 1000 hours .
D . All test samples, No . 1 to No . 10, are placed horizontally .
E . All test samples should remain the state of continuous rotation
throughout the test time to pass
the test .
Drop test
Test conditions :
A . Free falling from an elevation of 120cm of height.
B . The electrical functions, appearances and structures of all
test samples should remain normal after
the test .
Working Temperature / Humidity cycle test
Test Equipment :
A. Temperature & Humidity Chamber
B. Integrated Monitoring Software/Hardware
C. PC
Test conditions:
A. Temperature:-10℃ ~ 60 ℃
B. Humidity:0 ~ 98 ％
C. DC voltage setup – 2.4V
D. All test samples, No.1 to No.10, are placed horizontally
E. Running Cycle:2 Times
F. The electrical functions, appearances and structures of all test
samples should remain normal
throughout the test.
Stock Temperature / Humidity cycle test
Test Equipment :
A . Temperature & Humidity Chamber
B . Integrated Monitoring Software/Hardware
C . PC
Test conditions:
A . Temperature :-10 ~ 85 ℃
B . Humidity:0 ~ 98 ％
C . Running Cycle : 1 Time
D . The electrical functions , appearances and structures of all
test samples should remain normal after
the test .
On / Off cycle test
Test Equipment :
A. Integrated Monitoring Software/Hardware
B. PC
Test conditions :
A. Cycle setup : Power On for 20 seconds and then Power Off for
10seconds
Total cycles : 10000 times per test sample
B. DC voltage setup – 2.4V
C. All test samples, No.1 to No.4, are placed horizontally
D. The electrical functions, appearances and structures of all test
samples should remain normal
throughout the test.
Precautions
1 . Risun Expanse Corp . will not assume responsibility for the
performance of the products if the application condition falls
beyond the parameters stated forth in this specification .
2 . A written request should be submitted to Risun Expanse Corp .
prior to written approval if abnormality or deviation from this
specification is required .
3 . When storing , handling , or operating this product , please
keep any magnetic or ferromagnetic substances off the proximity of
this product .
4 . When handling or operating this product , please do not apply
pressure to or drop this product , or handle this product by its
lead wires .
5 . The correct polarity , Positive(+) and Negative(-) , has to be
clearly identified before connecting this pr oduct to the power
supply . Please do not connect this product to the power supply
with reverse polarity .
6 . This product may not perform normally in corrosive , highly
humid , or dusty environment .
Contact information:
Skype/Tel:152 7034 4076
Molly shi
