Anodized Aluminium Profile For Window Frame AA6063 T5 Silver Color
/ Industrial Aluminium Profile
Descrition:
Anodized Aluminum profile is mainly applied in top-end doors and
windows for the East Asian, Middle East, South American market,
especially in Mexico and Columbia. The quality is much better than
mill finished aluminum profile. Its life is much longer and surface
is much more smooth and beautiful. It is very popular in top-end
house, department and business building.
It can also be applied in curtain, floor, solar energy, frame of
light box, advertising industry, etc.
Material Composition
Aluminum Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | impurity | Al |
6063 | 0.2-0.6 | <0.35 | <0.1 | <0.1 | 0.45-0.9 | <0.1 | <0.1 | <0.1 | <0.15 | Rest |
6063A | 0.3-0.6 | 0.15-0.35 | <0.1 | <0.1 | 0.6-0.9 | <0.05 | <0.15 | <0.1 | <0.15 | Rest |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | <0.15 | 0.8-1.2 | 0.04-0.35 | <0.25 | <0.15 | <0.15 | Rest |
LTF21 | <0.6 | <0.7 | <0.2 | 1.0-1.5 | <0.05 |
| <0.1 | <0.15 | <0.1 | Rest |
6005 | 0.6-0.9 | <0.35 | <0.1 | <0.1 | 0.4-0.9 | 0.1 | <0.1 | <0.1 | <0.15 | Rest |
Physical property
Aluminum Grade | Temper | Wall Thickness | Resist Pull Point(Mpa) | Stretch (Rpo.2 Mpa) | Stretch Rate | Webster Hardness |
6063 | T5 | All | 160 | 110 | 8 | 8 |
T6 | All | 205 | 180 | 8 |
|
6063A | T5 | =<10 | 200 | 160 | 5 | 10 |
T6 | >10 | 230 | 190 | 5 |
|
6061 | T4 | All | 180 | 110 | 16 |
|
T6 | All | 265 | 245 | 8 |
|
LTF21 | O,H112 | All | =<185 | 260 | 16 |
|
6005 | T5 | =<3.2 | 260 | 240 | 8 |
|
| >3.2-25 | 260 | 240 | 10 | |
Aluminum Profile meter weight( kg/m) tolerance
- Wall thickness 1.2 : ±5﹪ kg/m
Wall thickness 1.0-1.1: ±7﹪kg/m
Wall thickness 0.8-0.9: ±8﹪kg/m
Wall thickness 0.6-0.7: ±10 kg/m﹪
Wall thickness <0.6: ±12﹪kg/m
Anodized thickness: 8~12μm
Competitive Advantages:
- Cost: The whole production lines are adopted, produces the products
begin from aluminum ingot, minimize the cost from every single
step.
- Quality: The modern management and advanced equipments create the stable
and super quality.
E.G: The most advanced aluminum rod homogenizing furnaces are
adopted to make the aluminum rod more stable.
Automatic digital control anodized production lines with advanced
anodizing formula creates the even surface and control the anodized
thickness within 8 to 12μm. The precision is much better than
manual operation.
- Service: Any request will be replied within 24 hours, Local office in
Mexico, Colombia and Canada, no communication problem, no time
difference problem.
You can also get these advanced conditions below:
- More than 400 types moulds are adopted, can meet almost all kinds
of design in South American market.
- Good Quality Control, CE, ISO certificates approved.
- Fast Delivery, Only 15 Days which is not easy achieve for other
factory in China.
- Expert export Package, perfect protection, length could reach to
5.995m, full loaded and minimized the waste space of 20GP and 40HQ
container.
Production Process:
First Step: Melting the aluminium ingot into aluminium rod.
Second step: Homegeneous treatment.
Third step: Extruding the aluminium rod into profiles.
Fourth step: Aging furnace treament to make the suitable hardness.
Last Step: Anodizing.
The anodizing process is controlled by automatic digital computer
which can avoid any misuse by manual operation.
Packing and loading
Packing: With the plenty of export packing experience, Maxl will
ensure the package will be good enough for seaship transportation.
Loading: Full loaded, minimized the waste of the container space, optimize
the cost of transportation.
Have you met the problems with your supplier below?
- No suitable mould
- The quantity is too less to produce
- High rate in surface scratching
- Long production time
- Damaged in shipping
- Language problem
- Low efficiency because of time difference
Try MAXL, the professional manufacturer of aluminum profiles for South
American market, ready to serve you at any time.
