PVDF pneumatic diaphragm pump for pharmaceutical feed, transfer
90gpm 340L/min suction height 5m
Specification
| Max.working Pressure | 100psi ( 0.7Mpa , 7bar ) |
| Max.flow Rate | 90 gpm ( 340 lpm ) |
| Max.reciprocating Speed | 200cpm |
| Max.suction Height | 5m |
| Max.permitted Grain | 5mm |
| Max air Consumption | 125scfm ( 3.5m³/min ) |
| Air Inlet Size | 1/2 in.npt(f) |
| Air Outlet Size | 1/2 in.npt(f) |
| Fluid Inlet Size | 11/2 in.npt(f) |
| Fluid Outlet Size | 11/2 in.npt(f) |
| Weight | PVDF pump 20.0kg PP pump 16.0kg |
Descriptions
A single piece polypropylene center section for increased
reliability and chemical compatibility, plus high-reliability
modular air valve. The overmolded frame for improved reliability
and will help to eliminate fluid leakage and new generation of
diaphragm design that increases flow with flow rates up to 265 gpm
(1004 lpm) - making it one of the most efficient pumps on the
market.
- Self priming
- Dry proof
- High suction capacity
- No electric components
- Discharge outlet with protection
- Solid external sturcture
- Vast compatibility of fluid media
- Reduced internanal volume minimize the waste and easily clean
- Stainless steel bolt are corrosion resistant, and offer you
reasonable positioing and conveniently reassemble
- Unique designed three way control valve ensure no block operation,
easily parts maintenance, no need lubrication for air pipeline
- Worn resistance parts ensures precisely positioning of stem and
fast replacement
Product drawing:
Applications:
Waste water treatment, sludge, screening | Effluent treatment plant | Pharmaceutical feeds, transfer |
Automotive wash, lube, oil | Ceramics mix & cast, glaze | Chemical injection, process |
Pulp & paper batching, bleaching | Construction coating, dewatering | Food processing transfer, packaging |
Marine bilge, cleaning | Mining utility, dewatering | Oil & gas transfer, clean up |
Comptetitve advantage
The air-driven double diaphragm transfer pumps. No electrical
components are required because the pumps are
air-driven. RD series pumps are run-dry safe and self-priming. The
pump capacity can be controlled by changing
the pressure in the air supply. The air control is designed for
oilfree operation. The RD series pumps are ideally
suited for the transport of liquid chemicals. It transports media
at up 6,700 l/h and up to a discharge lift of 70 m.
As the pump capacity is highly dependent on the back pressure, the
performance curve must always be observed.
At the sametime, the differential pressure between the hydraulic
and pneumatic sides should not exceed 2 bar. Higher
values reduce the service life of the pump. When selecting pumps,
check the material compatibility. In addition,
consider the density, viscosity and temperature of the transported
medium.
