1. Features
1)Using LUXEON 5050 led chip to ensure high lumen and long life.
Whole lamp output light efficiency >165LM/W.
2)Adoption LEYOND exclusive Lens with light transmittance up to
98%.Seals using silicone rubber, oil proof, aciduric, alkali fast, fire
resistant.The unit construction of lamp adopt waterproof and dust
proof design, It can meet the indoor and outdoor needs .
3)Perfect Light Distribution Solution:Adoption of integrated shell
optic lens, enhance the
brightness and illumination uniformity.
4)There are 95°beam angle for your optional, optimized light
distribution design solution.
5)High luminous efficiency, High quality power supply, input
voltage 100-240V. The power efficiency is more than 90%, power
factor greater than 0.98, UL compulsory certification.
6)The whole lamp with the powder coating is brighter, without
fading and corrosion.
7)Impact Resistance, Shock-proof, Without Ultraviolet (UV) and
Infrared (IR) Radiation: No filament and glass frames, avoid break
of the traditional lamp,without harm to the human body.
8)The CCT of Warm white,Neutral white,Pure white to meet the needs
of different occasions, eliminated the low color temperature of the
sodium lamp which cause the depressed mood, observers will feel
more comfortable.
2. Specificate
Par NO Parameter | LY-YL20150PW | LY- YL20150WW | LY- YL20150NW | | Inptut voltage | AC100V～240V 50/60HZ | | Sysem consumption(W) | 150 | | Luminous flux(lm) | 24000 | 21000 | 23200 | | Chip Brand | LUXEON 5050/3030 /LEYOND 5050 | | Beam Angle | 85 DEG | | CRI | ＞70 | | Color Temperature | Warm white:5000-6500K / Neutral white:2700-3200K / Pure
white:4000-4500K | | LED Driver | MEAN WELL ELG-150 | | Luminous efficiency(lm/w) | ＞155 | | Lifespan(hrs) | ＞50000 | | IP Rating | IP66 | | Dimmable | YES＆NO | | Size(mm) | 383x383x61 | | Net Weigh(kg) | 5.8 | | Package Size(mm) | 415*415*120 |
|
3. Product Details:
Ant -Glare 100W 120W 150W Ceiling Mounted Canopy Gas Station
Workingshop Lights
Mounting with Handle
STEP1:
First check if the site can afford the weight of more than 1.5
times of the light. If not,please do not install.
STEP2:
Install the LED modular Light onto the wall or the lampposts:punch
hole on the wall or lampposts, prepare the expansion screw ,and
then fasten the LED modular Light .
STEP3:
Remove the hexagonal screws on the LED modular Light handle,then
adjust the angle you need,finally fasten the LED modular Light with
the screws.
STEP4:
The ex-factory of the standard components of the LED modular Light
include a 3*1mm2 cable. Connect the wires correctly.
STEP5:
Switch on the power and make sure the light is on.Then the
installation is done.
Mounting with Pipe
STEP1:
Feed the luminaire leads through the Stem and attach Stem to
luminaire by threading the stem into the threaded hub.
STEP2:
Assemble the junction box to the Stem by placing one of the conduit
nut onto stem.
STEP3:
Loosen,do not remove,junction box screw and flflip junction box
cover up.Place the junction box onto the stem.
STEP4:
Place the second conduit nut on to the stem from inside The
junction box and tighten the nut.
STEP5:
Connect the wires correctly and make sure the good wire protection.
STEP6:
Sealed by water proof glue between fixture and pole.
Surface Mounting
STEP1:
Openings one hole greater than 10-40mm through hole in the ceiling.
STEP2:
Put the fifixture on the ceiling, make four marks according to 4
mounting kits, then drill 4 holes for them.
STEP3:
Connect the wires correctly and make sure the good wire protection.
STEP4:
Get rubber plugs into the holes, match 4 mounting kits to the
Rubber plugs, then fifix the fifixture on the ceiling by screws.
Ensure that no wires are pinched during installation of luminaire.
STEP5:
After installation, sealed by waterproof glue between fifixture and
the mounting surface.
4. Distribution Curve
5. Operation and Storage Condition
Operation Ambient Temperature -25 to +50°C, Relative Humidity
20~90%
Input Voltage 100~240V AC, 50/60Hz
Storage Ambient Temperature -30 to +65°C, Relative Humidity 5~95%
Mounting Height : Suitable for 6~18m height
6. Application
FQAs:
1. What`s the chip and driver does the light use?
----- Bridgelux 45mil chip and Meanwell Driver.
----- We are the Strategic Partners with Taiwan Epsitar and US
Bridgelux company. And also have good relationship with MW company.
We keep all material are original and qualified before our
production.
2. How many years warranty are you provide?
----- We will offer 5 Years warranty,
3. What is the lighting range does the lamp can made?
----Answer: The lighting range can reached 50-100M,
4. How height does the lamp should be installated?
----the suitable installtion height is 6-18m.
5. What is your website? Are you manufacturer?
----Yes, we are professional manufacturer which special on High
Power led light developing and producing from 2005. Welcome to
visit our werbsite on www.leyond.com.cn. And if you have time to
China. Please feel free to contact us. Your coming will be highly
welcomed for us.
