Sign In | Join Free | My burrillandco.com
Home >

SOA Optical Amplifier System

  • Product Details
  • Company Profile

SOA Optical Amplifier System

Typical Applications Technical Specifications Related Euipment Related Download

Technical specifications

FunctionParameterRemark
Working wave length range1280nm ~ 1330nm
Input power range (total power)

-17dBm ~ -4dBm


Output power range (total power)2dBm ~ 12dBm
Gain≤14dB
Gain flatness≤2dB
Noise figure≤7.5 dB
Polarization dependent gain≤2dB
Working temperature range-10℃~60℃
Working humidity range5%~95% no condensation
Storage temperature-40℃~85℃
Equipment dimensionOSP3800 1RU： 442(W)×350(D)×44(H)mm
Network management

Support multi-kinds of graphical interface network management,

such as SNMP and Web

Optional
System capacity6*100G optical signal amplification1U full load
Optical interfaceLC/UPC
Power supplyAC: 90 ~ 260V or DC: -72~ -36 V (1+1 power input backup)
Typical power consumptionFull configuration <110W
Heat dissipationFan cooling
MTBF＞100000 hours

Related Euipment

EDFA Optical Amplification System
OEO Optical Relay Amplification System
SOA Semiconductor Amplification System
RAMAN Amplification System

7210 EDFA all-in-one equipment

The main function of the EDFA optical amplification subsystem is to compensate the signal’s optical power in the transmission link, which can finally extend the optical signal transmission distance. It can be divided into OBA, OLA and OPA based on the application scene. BA is usually used at the transmitting end to boost the output optical power of the system. LA is usually used at the repeater section to compensate the power loss of the line. PA is usually used at the receiving end of the system to improve the input optical power. The EDFA can amplify all the input optical signals by using the erbium-doped fiber as the gain medium and using the 980nm or 1480nm pump laser as the pump source with one-stage or two-stage amplification. It’s one of the most indispensable and important part of the DWDM system, high speed transmission system and all optical network in the future.

Explore Further

Plug-in EDFA System

The main function of the EDFA optical amplification subsystem is to compensate the signal’s optical power in the transmission link, which can finally extend the optical signal transmission distance. It can be divided into OBA, OLA and OPA based on the application scene. BA is usually used at the transmitting end to boost the output optical power of the system. LA is usually used at the repeater section to compensate the power loss of the line. PA is usually used at the receiving end of the system to improve the input optical power. The EDFA can amplify all the input optical signals by using the erbium-doped fiber as the gain medium and using the 980nm or 1480nm pump laser as the pump source with one-stage or two-stage amplification. It’s one of the most indispensable and important part of the DWDM system, high speed transmission system and all optical network in the future.

Explore Further

OEO Optical Relay Amplification System

The OEO optical relay amplification subsystem , adopts the clock and data recovery (CDR) chip design with the highest performance and flexibility in the industry. It can perfectly realize the function of optical signal regeneration and amplification, signal cleaning and shaping with features of highly compact structure, flexible configuration and low power consumption. The system support the relay amplification of optical signals at any rate between 100M~100G with all modes and is widely applied in the field of operators, private networks and information systems.

Explore Further

SOA Optical Amplifier System

The SOA optical amplification subsystem is a special amplification platform for low power optical signal of 100G high-speed services in optical networks. It adopts the plug-in card type and hot-plug design with the characteristics of high integration, low power consumption and stable output power. The system is widely used in data link power amplification and extending transmission distance in various industries.

Explore Further

ROMAN Amplifier System

This document specifies the requirements of a C-band distributed RAMAN amplifier. The amplifier modules can be operated at constant pump power ( AWC). Different wavelength pump power can be adjusted to achieve smooth gain spectrum for the DWDM network application. It can amplify the single channel signal, in order to achieve the best OSNR; the module integrated a narrow band filter to suppress the ASE power.

Explore Further

Related Resources

‌‌ISEELINK‌‌ Product catalog

PDF - 8.18 MB - Updated on Wednesday, March 25, 2026

Quality SOA Optical Amplifier System for sale

SOA Optical Amplifier System

You May Like

Company Info.
Shenzhen iseelink Communication Technology Co., Ltd.
Verified Supplier
View Contact Details
Product List
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
Send your message to this supplier
*From:
Your email address is incorrect!
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details:
  • --Self introduction
  • --Required specifications
  • --Inquire about price/MOQ
Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!
Send your message to this supplier
 
*From:
*To: Shenzhen iseelink Communication Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0

Friendly Links: www.everychina.com

Home| Products| Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2026 burrillandco.com. All rights reserved.