Sign In | Join Free | My burrillandco.com
Home >

30ml Ceramic Glass Coating

    Buy cheap 30ml Ceramic Glass Coating from wholesalers
     
    Buy cheap 30ml Ceramic Glass Coating from wholesalers
    • Buy cheap 30ml Ceramic Glass Coating from wholesalers
    • Buy cheap 30ml Ceramic Glass Coating from wholesalers
    • Buy cheap 30ml Ceramic Glass Coating from wholesalers
    • Buy cheap 30ml Ceramic Glass Coating from wholesalers

    30ml Ceramic Glass Coating

    Ask Lasest Price
    Model Number : GT-1235
    Supply Ability : 1000000pcs/month
    Brand Name : Getsun
    Payment Terms : T/T
    Delivery Time : 30 working days
    Certification : ISO9001/MSDS
    • Product Details
    • Company Profile

    30ml Ceramic Glass Coating


    30ml Automotive Glass Protection

    Hydrophobic Ceramic Glass Coating for Automotive Windshields

    A ready-to-use, single-component coating that forms a transparent nano-scale layer on glass and other smooth inorganic surfaces.

    30ml ceramic glass coating bottle beside a clean car windshield

    Ceramic Glass Coating for Cleaner, Water-Repellent Surfaces

    This ceramic glass coating creates an ultra-thin transparent protective layer with hydrophobic, oleophobic, and anti-fouling properties. On automotive glass, rainwater forms droplets and moves off the surface more readily, helping maintain visibility in wet conditions and reduce frequent wiper use.

    Buyer challenge

    Water, Road Film, and Contaminant Adhesion

    Untreated vehicle glass can retain water, dirt, insect residue, and airborne contaminants, increasing cleaning effort and affecting clear viewing during rainy driving.

    Product solution

    Transparent Surface Protection

    The coating forms a nano-scale layer that repels water and oil while helping reduce contaminant adhesion. Correct cleaning, degreasing, application, and heat curing are essential to the finished result.

    When to Apply Windshield Ceramic Coating

    Use the windshield ceramic coating after thoroughly removing oxidation film, oil film, dust, and residues from the glass. The surface must be clean and dry before treatment.

    Before Wet-Weather Driving

    Apply to properly prepared windshields when improved water beading and easier runoff are required for rainy conditions.

    After Deep Glass Cleaning

    Treat the glass immediately after the oil film and other contaminants have been removed and the surface is completely dry.

    When Protection Declines

    Reapply using the same preparation and curing process when the water-repellent effect gradually decreases.

    Core Product Features

    The 30ml format combines a ready-to-use coating system with two heat-curing options for different application environments.

    Single-Component System

    The coating is supplied ready to use, with no component mixing step stated in the application procedure.

    Hydrophobic Performance

    Rainwater beads and slides from the treated surface more readily, supporting clearer visibility in rainy conditions.

    Oleophobic and Anti-Fouling

    The protective layer helps reduce the adhesion of oil, dirt, and insect residue for easier routine cleaning.

    Transparent Nano-Scale Layer

    The coating forms an ultra-thin transparent layer suited to glass and other confirmed smooth inorganic surfaces.

    Two Heat-Curing Options

    Cure with hot air from a hair dryer for 5–10 minutes or bake at 150°C for 30 minutes where suitable equipment is available.

    Weather and Aging Resistance

    The treated layer is designed to withstand weather exposure and help reduce the effect of airborne pollutants on the surface.

    Applications for Automotive Glass Coating

    This automotive glass coating is intended for clean glass, glazed ceramics, and other smooth inorganic surfaces. Surface suitability and access to the required heating method should be confirmed before application.

    Suitable Applications

    • Automotive windshields
    • Vehicle side and rear glass
    • Glazed ceramic surfaces
    • Other smooth inorganic surfaces
    Water droplets beading on automotive glass after hydrophobic coating

    Why This Hydrophobic Glass Coating Supports Practical Service Work

    The product combines defined surface preparation, controlled solvent evaporation, and heat curing in a repeatable application workflow.

    Decision FactorProduct SolutionPractical Buyer Benefit
    Application formatReady-to-use, single-component liquidRemoves the need for a stated mixing step before application
    Curing flexibilityHot-air curing or controlled bakingSupports different treatment setups when the stated conditions can be met
    Surface behaviorHydrophobic, oleophobic, and anti-fouling transparent layerHelps reduce water and contaminant adhesion without adding an opaque finish

    Practical Benefits for Vehicle Glass Care

    Faster Water Runoff

    Water forms droplets and moves from the treated glass more readily during rainy conditions.

    Easier Surface Cleaning

    Reduced adhesion of dirt and insect residue can make routine wiping and maintenance more convenient.

    Clear Transparent Finish

    The ultra-thin protective layer is transparent and intended to preserve the visible appearance of the underlying surface.

    How to Apply Ceramic Glass Coating

    Avoid direct sunlight. When treating a windshield, work on the left and right sides separately and do not operate the wipers during treatment or drying.

    1

    Remove Oil Film

    Use a specialized glass oil-film remover with a clean towel or lint-free tissue. Wipe repeatedly to remove oxidation film and contaminants.

    2

    Rinse and Dry

    Rinse with clean water and dry thoroughly. Confirm that the surface is clear, dry, and free from dust, oil, and residue.

    3

    Apply a Thin Film

    Immediately apply or spray a small amount onto medical gauze or a lint-free cloth, then spread a thin liquid film across the glass.

    4

    Allow Solvent Evaporation

    Wait 3–5 minutes before heat curing so the solvent can evaporate from the applied film.

    5

    Heat Cure

    Use hot air from a hair dryer for 5–10 minutes. The stated best-curing method is baking at 150°C for 30 minutes where the substrate and equipment permit.

    6

    Final Wipe and Inspect

    After drying, remove any unreacted residue with a clean, dry cloth. If the result is unsatisfactory, repeat the process once.

    Six-step ceramic glass coating preparation application and heat-curing process

    Product Information

    Package and formatCompact 30ml ready-to-use, single-component liquid
    Treatment focusTransparent water-, oil-, and contaminant-repellent surface treatment
    Suggested workflowDecontaminate, dry, apply a thin film, allow evaporation, heat cure, and wipe
    Handling conditionsProtect from moisture and keep sealed between uses within the recommended storage range

    Storage and Cautions

    Storage

    Store at 18–25°C. The coating is sensitive to moisture, so keep the container tightly sealed after use to prevent deterioration.

    Important Cautions

    • Avoid direct sunlight during application.
    • Clean and degrease the surface thoroughly before coating; residue can interfere with bonding and durability.
    • When treating a windshield, work on the left and right sides separately.
    • Do not use windshield wipers during treatment and drying.

    Frequently Asked Questions

    Which surfaces can be treated?

    The confirmed application scope includes glass, glazed ceramics, and other smooth inorganic surfaces.

    Must the glass be degreased first?

    Yes. A specialized glass oil-film remover is required to remove oxidation film and contaminants before the coating is applied.

    How is the coating cured?

    Use hot air from a hair dryer for 5–10 minutes, or bake at 150°C for 30 minutes where suitable equipment and surface conditions allow.

    How long can the protection last?

    The supplied product information states up to 12 months under indoor conditions. No fixed outdoor windshield duration is claimed on this page.

    Can the surface be treated again?

    Yes. When the effect gradually decreases, clean and prepare the surface again, then repeat the same application and curing process.

    For 30ml packaging information, product specifications, or sourcing questions, contact our product team for specification and quotation details.

    Quality 30ml Ceramic Glass Coating for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Guangzhou Helioson Car Care Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Car Glass Cleaner products from this supplier
    Inquiry Cart 0