YJJ DC1040CL-301000-E PID Process Controller for Precise Industrial Temperature Control

Product Description:

YJJ DC1040CL-301000-E PID Process Controller for Precise Industrial Temperature Control

Features:

I. Complete Model Segmentation Explanation: DC1040CL-301000-E

DC1040: Series size 96mm × 96mm (1/4 DIN square panel), dual-row digital tubes + 0~100% output light column display

CL: Input type = Linear linear analog input, only supports 4~20mA, 0~5V, 0~10V industrial transmitter signals; cannot be directly connected to thermocouples / PT100 thermoresistors

3: Main control output OUT1 = 4~20mA analog current continuous PID output (no contact proportional adjustment)

0: Second control output OUT2 = No additional control output

1: Alarm channel = 1 SPDT single-pole double-throw relay alarm (AL1)

00: No transducer output, no external remote setting SP function

0: No RS485 Modbus-RTU communication interface, only local single-machine operation, does not support PLC remote networking

E: English operation menu interface

II. Core Hardware Electrical Performance Parameters

1. CL Linear Analog Input (Core Feature)

Supported signals: 4~20mA DC, 0~5V DC, 0~10V DC standard industrial transducer signals (compatible with M5256 pressure transducer, VY400 vortex flowmeter, oxygen / gas 4-20mA transducer module)

Measurement accuracy: Full scale ±0.5% FS, decimal place 0.01/0.1/1 adjustable

Sampling period: 500ms / time

Current input impedance: ≤100Ω; Voltage input impedance ≥100kΩ

Breakdown detection: Input signal loss automatically triggers AL1 fault alarm

2. PID Main Control 4~20mA Current Output (Code 3)

Output specification: 4~20mA DC, maximum load impedance 500Ω, continuous linear without contact adjustment

PID algorithm: Standard PID + anti-integral saturation, supports automatic self-tuning AT, manual / automatic without disturbance switching A/M

PID parameter adjustable range:

Proportional band P: 0~200% (P=0 is switch ON/OFF two-position control)

Integral I: 0~3600s; Derivative D: 0~900s

Output has no mechanical wear, suitable for high-frequency continuous adjustment conditions

3. Single-channel Alarm Relay AL1

Contact specification: SPDT single-pole double-throw, 3A/240VAC resistive load

Built-in 17 alarm modes: absolute value upper and lower limits, deviation over-limit, signal break, standby warning, etc.

Independent threshold setting, can be linked to sound and light alarmers, cutting off solenoid valves, equipment shutdown circuits

4. Power Supply and Environmental Specifications

Power supply: General wide-range AC85~264V 50/60Hz, maximum overall power consumption 8VA; optional DC15~50V direct current power supply

Operating environment temperature: 0~50℃; storage -20~+65℃

Humidity: 20~85% RH, no condensation

Protection grade: front panel IP65, back wiring terminals IP30

Electromagnetic compatibility: CE industrial EMC certification, resistant to motor, frequency converter surge interference

Parameter storage: EEPROM power-off permanently saves parameters, no need for backup battery

5. Human-Machine Display and Keys

Dual 4-digit digital tubes: Upper row PV real-time measurement value, lower row SP process setting value

10 segments green LED light column: Intuitively display 0~100% PID output power ratio

Operation keys: SET setting, A/M manual-automatic switching, up and down increase/decrease keys Status indicator lights: OUT - main control output, AT - self-tuning, AL1 - alarm, MAN - manual mode

6. Mechanical installation dimensions

Panel appearance: 96 (W) × 96 (H) mm

Control cabinet opening: 92 × 92 mm

Overall depth: 95 mm

III. Product core advantages

Specialized controller for linear signals: Not limited to temperature control, can perform closed-loop PID regulation for pressure, flow, level, and gas concentration, compatible with all 4-20mA output type transmitters;

4-20mA contactless current output, with a service life much longer than relay contact output, compatible with electric proportional valves, SCR solid-state power regulation, and variable frequency fans;

5. Automation of Standalone Small Equipment

A complete closed-loop process can be accomplished without the use of PLC: Transmitter collects signals → Instrument PID calculation → 4-20mA drives the actuator, and the alarm relay serves as a safety interlock.

Specifications:

Shenzhen Yijiajie Electronic Technology Co., Ltd. has long been deeply engaged in the field of sensing and control technology, specializing in sensor solutions and technical support.

The company is an authorized distributor for City, and Siargo, and maintains long-term, stable partnerships with other renowned brands, including Alphasense, DDS, Dynament, Figaro, Hamamatsu, ISC, MSA, TE, AII, Dräger, ITG, SENKO, Winsen, and Cfsensor.

Our products are widely applied across various sectors, including data communications, consumer electronics, industrial automation, automotive electronics, medical equipment, laboratory settings, security and safety systems, and scientific research institutions.

Adhering to a customer-first philosophy, we are committed to continuously creating core value for our clients by providing reliable sensing components and comprehensive technical support.