Automatic Voltage Regulation: The internal digital voltage
regulation circuit can reduce feed speed variation caused by mains
voltage fluctuation.
Time Adjustable Soft Start: The controller will gently increase
output voltage from 0 to the preset value when powered on to avoid
a sudden shock. Soft start time can be digitally preset
Preset Speeds: 4 feed speeds can be preset, stored, and outputted
by connecting external short-circuit signals.
Dual Switch Sensor ON/OFF Control: 2 NPN switch sensors or PLCs can
be connected to turn on/ off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent
Photoelectric Sensor can be connected to turn on/off the
controller.
Remote Speed Control: The output voltage of the controller can be
adjusted remotely by an external potentiometer, a PLC, or a 1- 5V
DC signal.
DC Control Output: The controller can output low-voltage DC power
associated with ON/OFF Control of the controller to drive a
solenoid or other external devices.
Overheat Protection: If the internal temperature of the controller
gets too high, the controller will stop its output to protect
itself.
Overcurrent Protection: If the output current exceeds its rated
value, the controller will stop its output to protect itself and
the load.
Overvoltage Protection: If the input voltage is too high, the power
supply of the controller will be shut down automatically to protect
itself.
Fuse-Short Circuit Protection: If the output of the controller is
short-circuited, the fuse inside will blow to protect the
controller and the load.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be
preset to protect the load from damage caused by too high a
voltage.
