Strain‑Controlled Loading Consolidation Apparatus

Strain‑Controlled Loading Consolidation Apparatus

Model BTU-STC-1S

Description

This equipment is a strain‑controlled loading consolidation apparatus(constant rate of strain – CRS), model BTU-STC-1S, used to perform strain‑controlled loading consolidation tests (CRS) with real‑time pore pressure measurement. Main features:

• Specimen sizes: Φ61.8×H20 mm and Φ61.8×H40 mm
• Load frame: maximum axial force 10 kN, built‑in 4‑channel data logger
• Load cell: 0‑10 kN, accuracy ±0.1% FS
• Pore pressure sensor: 0‑3.2 MPa (accuracy not stated, assumed ±0.1% FS)
• Supplied with computer‑based data acquisition and control software

Test Standards (International)

• ASTM D4186(Constant rate of strain consolidation – CRS)
• ASTM D2435(One‑dimensional consolidation – CRS is a derived method)
• ASTM D4546(Load‑unload‑reload consolidation)
• ISO 17892‑5(Consolidation test)
• BS 1377‑6(Consolidation test)

The equipment can meet the requirements of these standards for loading, displacement measurement, pore pressure monitoring, etc.

Specification

> Note: The loading rate range, displacement stroke, etc., are not specified – refer to the product manual.

Detail

• Strain‑controlled loading (CRS)– Loads the specimen at a constant axial strain rate (e.g., 0.01 mm/min), continuously recording axial stress, strain, and pore pressure, thereby rapidly obtaining consolidation parameters (Cv, Cc, Pc, etc.).
• Two specimen heights– 20 mm (conventional) and 40 mm (longer drainage path).
• Real‑time pore pressure measurement– Monitors pore water pressure during consolidation, useful for calculating Cv and effective stress paths.
• Built‑in 4‑channel data logger– Simultaneously records axial load, displacement, pore pressure, etc.
• Maximum axial force 10 kN– Corresponds to a maximum axial stress of about 3.3 MPa (for Ø61.8 mm specimen), suitable for most soil consolidation tests.
• High‑precision load cell– ±0.1% FS, reliable data.
• Computer software– Fully automatic test control, real‑time display of stress‑strain and pore pressure‑strain curves, automatic calculation of consolidation parameters.

Application

• Rapid consolidation testing– CRS saves significant time compared to traditional step loading, suitable for batch testing.
• Low‑permeability soils– For clays and other low‑permeability soils, CRS efficiently provides consolidation coefficients.
• Effective stress analysis– Pore pressure measurement allows study of effective stress changes during loading.
• Soft soil subgrades– Evaluate consolidation characteristics for settlement prediction.
• Research and teaching– University soil mechanics laboratories, research institutions.

Advantages

• CRS rapid consolidation– Can save more than 80% of test time compared to step loading.
• Real‑time pore pressure measurement– Provides additional effective stress information, improving calculation accuracy.
• Two specimen heights– Flexibility for different research purposes.
• Built‑in data logger– Highly integrated, reduces external equipment.
• High‑precision sensors– 0.1% FS, meeting research requirements.
• Fully automatic software– Automatic control, acquisition, calculation, reducing human error.

What To Choose

Select this equipment or compare with other models based on testing requirements:

Process Flow

Example:CRS consolidation test (constant rate of strain)

• Specimen preparation
  • Cut undisturbed or remoulded specimen using a Φ61.8×20 mm or 40 mm ring.
  • Measure initial water content and density; saturate if required.

• Specimen installation
  • Place the specimen into the consolidation cell (with porous stones and filter paper), connect the pore pressure sensor.
  • Install the displacement sensor.
  • Position the cell in the load frame and connect the axial load cell.

• Set test parameters
  • In the software, select “CRS consolidation module”.
  • Set a constant strain rate (e.g., 0.01 mm/min).
  • Set maximum axial strain (e.g., 20%) or maximum axial force (10 kN).
  • Set data acquisition interval (e.g., 1 second).

• Start the test
  • Start the servo loading system to push the piston downward at a constant rate.
  • Software records axial force, axial displacement, pore pressure, and time in real time.
  • Plots stress‑strain curve and pore pressure‑strain curve.

• Stop condition
  • Automatically stops when the preset strain or maximum axial force is reached.

• Disassembly and cleaning
  • Unload, remove the specimen, weigh and dry to measure final water content.
  • Clean the consolidation cell and sensors.

• Data processing
  • Based on CRS theory, the software automatically calculates:
    • Coefficient of consolidation (Cv) from pore pressure and loading rate
    • Compression index (Cc), rebound index (Cs)
    • Pre‑consolidation pressure (Pc)
    • Coefficient of permeability (k) (indirectly)
  • Generates a test report.

Summary:

• BTU-STC-1Sis a strain‑controlled loading consolidation apparatus for CRS rapid consolidation tests, with a maximum axial force of 10 kN, pore pressure measurement, and suitable for rapid determination of consolidation parameters for fine‑grained soils.

260 workers, 25000 ㎡ non-dust workshop, 16 years experience, SGS & INTERTEK certificated, one hour reach Tianjin port, this is how we keep good quality and competitive prices for global valued customers.

Our main products cover Universal testing machine, Compression testing machine, Soil,Concrete,Cement Mortar,Aggregates Rocks, Asphalt Bitumen, NDT,Pavement ,Paint,Ceramics,Drilling Fluids, Geotextiles, Textiles, Environmental,General Equipment.BTUTEST is exporting its products to more than 60 countries by offering its services through its authorized distributors and representatives.

Our main customers are private and research testing laboratories, road and general contractors, concrete and cement manufacturers, asphalt manufacturers, government authorities, ministries, engineers, consultants and re-seller. We also cooperate with accredited research centers and the most important universities in the world.we can supply more top quality product and service for more customer’s.