Auto PCB Conveyor for Coating machine manufacturer
Scope of application
Suitable for SMT coating production lines, curing furnace
production lines, and non-standard equipment production lines
Featuresspecial single-chip control card module, the equipment length
specification can be 0.5m, 0.8m;
The track amplitude adjustment adopts the drive mechanism of the
adjusting seat, and the width is manually adjustedto ensure that
the track is adjusted for a long time without the phenomenon of
bell mouth.
Optional function
The automatic pcb conveyor can be equipped with an optional upper
lampshade, and the rotating layer returns to the track
Technical Specifications
| TECHNICAL PARAMETER |
| specification | Small material frame up and down plate machine | Large frame loading and unloading machine |
| Work direction and PCB edge space | Left L → Right R (standard), (right R → left L optional); PCBA process edge ≥ 5mm |
| transmission chain | Adopting black nylon flat engineering chain |
| Transmission motor and lifting motor | 3 sets of fixed speed motors and 1 set of brake motors |
| Material frame size | 355*320*565 (mm) | 535*530*565 (mm) |
| Applicable PCBA board maximum size | L50*W50-L330*W250 (mm) | L50*W50-L525*W460(mm) |
| Material frame lifting | Ball screw, cast aluminum integrated lifting platform |
| Push plate cylinder | PCB board push rod cylinder, domestic material frame clamping
cylinder |
| Overall dimensions | Send:L1330*W780*H1200(mm) | Send:L1800*W1120*H1350 (mm) |
| Received:L1750*W780*H1200 (mm) | Received:L2520*W1120*H1350 (mm) |
| Equipment air pressure and power supply | ≥0.4Mpa,交流220V 50-60Hz |
| Total power consumption and weight of the equipment | 0.5KW, Approx.240Kg | 0.5KW, Approx.290Kg |
| Control mode and communication port | PLC+display control touch screen, SMEMA communication signal port |
The PCB automatic pcb conveyor is a core supporting equipment at the front end of the SMT
production line, also known as the SMT automatic loading machine,
PCB loading machine, PCB automatic pcb conveyor , SMT feeding machine. It is an essential equipment for electronic
surface mount production, mainly used to automate the PCB board
transfer, loading, and feeding processes, replace manual board
placement, and effectively improve the automation efficiency and
production standardization of the production line.
This fully automatic pcb conveyor is a classic frame type loading machine structure, which runs
smoothly and delivers boards accurately. It can orderly transport
PCB boards inside the frame, eliminating problems such as offset,
missing boards, and jamming. The equipment is equipped with an
intelligent control system, which is easy to debug and has strong
compatibility. It can seamlessly connect with various SMT assembly
lines and adapt to multiple specifications of material frames and
PCB boards.
The equipment has the advantages of anti-static, flexible board
feeding, and anti scraping, which can effectively protect precision
circuit boards and ensure production yield. Supporting 24-hour
continuous stable operation, significantly reducing labor costs and
operational errors, with high cost-effectiveness and strong
durability, it is widely used in industries such as consumer
electronics, new energy, industrial control communication, etc. It
is the preferred equipment for enterprise SMT production line
automation upgrade.
Safety usage guidelines
Strictly follow the operating procedures when operating the PCB
automatic feeding table and SMT automatic pcb conveyor . When the equipment is running, it is forbidden to insert hands
and tools into the transmission and board feeding areas, and it is
strictly prohibited to power on and disassemble the machine for
debugging. The PCB automatic pcb conveyor needs to be placed flat, reliably grounded, and the working
environment should be kept dry and dust-free. Overloading and
non-standard material frame plate operations are prohibited. If the
equipment alarm occurs, it should be immediately stopped and the
power should be cut off for troubleshooting.
After sales warranty service
The entire range of PCB board machines and automatic pcb conveyor enjoy a complete machine warranty. During the warranty period, non
human caused faults can be repaired and replaced free of charge.
Lifetime one-on-one technical guidance, installation and
commissioning, and operation training are provided, with fast
after-sales response and efficient resolution of equipment
failures, reducing production losses.
Daily maintenance and repair
Regularly clean the track and probe, inspect the circuit and
accessories, and regularly add lubricating oil. Non professionals
are prohibited from disassembling the equipment without
authorization. After sales personnel can be contacted for on-site
maintenance and debugging to ensure the long-term stable operation
of the equipment.
Customer feedback and after-sales communication
Automatic pcb onveyor accurately and smoothly, matching coating
production lines well with low failure rate. Timely after-sales
finishes commissioning and troubleshooting. Durable equipment and
good service gain favorable comments and repeat orders.
Certification
CNSMT specializes in R&D of PCB/SMT automatic pcb conveyor with years of industry experience and solid technical capability.
Our well-crafted equipment delivers stable, accurate feeding to fit
diverse SMT lines, selling well domestically and overseas at
cost-effective prices to cut clients’ procurement costs. Supported
by full after-sales including commissioning, training and
maintenance, we welcome inquiries and cooperation.
Contact Information
