This product is suitable for temporarily fixing various types of
components,
ceramics, glass, metal plates, etc., and is suitable for various
electronic
industry specialties. kind of cutting protection
| Item | Typical Value | Test Method |
| Imperial | Metric |
| Backing | 4.0mil | 0.1mm | / |
| Total Thickness | 6.1mil | 0.155±0.005mm | / |
Adhesion | Before heating | 0.44-1.1lbs/in | 2-5 N/25mm | GBT 2792-2014 |
| After heating | 0 | 0 |
| Tensile Strength | ≥55bs/in | ≥3.5(KN/M) | GBT 30776-2014 |
| Elongation | ≥120% | ≥120% | GBT 30776-2014 |
Recommended debonding process: 110℃*4-15min(based on the heating
method and the thermal conductivity and heat transfer uniformity of
the attached object)
Storage
● Store under normal conditions of 10-30℃ and 40-70% R.H, out of
direct sunlight.
● Shelf life: 12 months from the date of manufacture when stored in
initial packing.
Precaution Reminder
● Surface should be clean, dry, free of dust, oil or other
contaminants.
● Proper pressure required by roller, hand or press when applying.
● Avoid repeat sticking to prevent adhesion decrease.
Notes
Please be advised that this technical data sheet is written based
on our lab tests and experience only. Customer is responsible to
determine the suitability of the product meets intended application
requirements before approved for use.
