6 Inch Two Roll Machine / Open Mixing Mill / Lab Rubber Mixer
1) The roll adopts the vanadium titanium metal alloy chilled cast
iron and its surface is hard and wear-proof. The internal cavity is
processed to make temperature well proportioned on the roll
surface.
2) The machine is equipped with an overload protection device to
prevent the main components from being damaged.
3) The machine is also equipped with an emergency brake device.
When an emergent arises, just draw the safety pull rod, and the
machine will stop immediately. It is safe and reliable.
4) The transmission system adopts a hardened tooth-surface reducer,
which has a compact structure with higher transmission efficiency,
lower noise and longer service life.
5) The base frame is a whole framework, which is convenient for
installation.
6) Stock blender for direct rubber sheet and knife to cut as your
need to assemble.
7) Auto-lubrication system for greese or oil and match bearing bush
Water-cooled Open Rubber Mixing Mill 18inch
1. The mixing mill is made of LTG-H alloy chilled cast iron
2. The open mixing mill speed reducing machine adopts hard tooth,
its running noise is low and owns long life. This mixing mill
adopts a special design of refining seal structure so that it can
eliminate the leakage of lubricating oil.
3. Our Company specially designed the human-orientated machine,
such as block rubber board and turbine tapping rubber device of
open mixing mill can be used steam style; Open mixing mill
operating system design in nearby working areas etc.
4. This mixing mill can be equipped with hydraulic or mechanical
device which can automatically make the rubber material be mixed
over and over again, so the labor intensity and mixing time can be
reduced greatly.
5. The roll nip of the mixing mill can be adjusted by using manual
or electrical mode
6. To ensure the safety of staff and equipment, we install
convenient button for emergency.
7. All the mixing mills we provide to you are checked through 8
hours non-stop full load operation, customers can use them
immediately after installation.
Rubber Mixing Mill Two Rolls Mill Open Mixing Mill Two Roll Mill
|
Item | XK-160 | XK-250 | XK-360 | XK-400 | XK-450 | XK-550 | XK-560 | XK-660 | XK-710 |
| Roll diameter | mm | 160 | 250 | 360 | 400 | 450 | 550 | 560-510 | 660 | 710 |
| Roll working length |
| 320 | 620 | 900 | 1000 | 1200 | 1500 | 1530 | 2130 | 2200 |
| Front roll linear speed | r/min | 9 | 16.3 | 16.7 | 19.3 | 21.8 | 22.5 | 27.2 | 28 | 31.9 |
| Speed ratio of rolls |
| 01: 01.4 | 01: 01.1 | 01: 01.3 | 01: 01.3 | 01: 01.3 | 01: 01.2 | 01: 01.2 | 01: 01.2 | 01: 01.5 |
| Max roll space | mm | 4.5 | 8 | 10 | 10 | 12 | 16 | 15 | 0.5-15 | 0.5-15 |
| Compound feeding capacity | kg | 1-2 | 10-15 | 20-25 | 18-35 | 50 | 50-65 | 50-65 | 165 | 190 |
| Motor power | kW | 5.5 | 18.5 | 30 | 45 | 55 | 110 | 90 | 240 | 280 |
| Dimensions(L× W× H) |
|
|
|
|
|
|
|
|
|
|
| L | mm | 1133 | 2722 | 4200 | 4920 | 5405 | 6646 | 6270 | 7280 | 8185 |
| W | mm | 920 | 1115 | 1780 | 1780 | 1740 | 2736 | 2282 | 3400 | 3910 |
| H | mm | 1394 | 1345 | 1760 | 1800 | 1790 | 2105 | 2000 | 2530 | 2270 |
| Gross weight | T | ~2 | ~3.2 | ~6.5 | ~8 | ~11.4 | ~22 | ~22.5 | ~49 | ~51 |
