5.5 Inch OLED Display Module with 256x64 Resolution Multi-Interface
Support
This high-performance 5.5-inch OLED module features 256×64
resolution, offering monochrome green display with 16 gray scales.
Equipped with SSD1322 driver IC and COF package, it supports 8-bit
68XX/80XX parallel interface, 3-wire/4-wire SPI, delivering clear
visuals, stable performance and low power consumption. With a wide
operating temperature range (-30℃ to +70℃) and RoHS compliance,
it's ideal for industrial controls, IoT terminals, portable
devices, automotive electronics and various electronic products
requiring high-reliability display solutions.
Key Specifications
| Display Type | 5.5 inch OLED | Module Number | GME25664-30 |
|---|
| Resolution | 256(H)×64(V) dots | Display Color | Monochrome (Green /16 Gray Scales) |
|---|
| Panel Size (W×H×T) | 146.00 × 45.00 × 2.00 mm | Active Area (A.A) | 135.65 × 33.89 mm |
|---|
| Pixel Pitch | 0.53 × 0.53 mm | Pixel Size | 0.50 × 0.50 mm |
|---|
| Interface | 8-bit 68XX/80XX Parallel, 3-wire/4-wire SPI | Operating Temperature | -30℃ to +70℃ |
|---|
| Driver IC | SSD1322 | Storage Temperature | -40℃ to +80℃ |
|---|
| RoHS Compliance | YES | Unspecified Tolerance | ±0.30 mm |
|---|
Product Highlights
- 5.5-inch OLED display with 256×64 resolution and 16 gray scales
- Multi-interface support: 8-bit parallel, 3-wire/4-wire SPI for
flexible integration
- SSD1322 driver IC ensures high reliability and stable display
performance
- Monochrome green display with >2000:1 high contrast ratio and
wide viewing angle (>160°)
- Wide temperature range (-30~70℃) for extreme environment adaptation
- Low power consumption with 1μA typical sleep mode current
- COF package design for compact structure and durable use
- RoHS compliant, meeting international environmental standards
- Long lifetime (40,000 hours at 80 cd/m² brightness)
- Suitable for industrial and automotive high-reliability
applications
Technical Features
- Multi-interface compatibility enables seamless connection with
various MCUs, reducing integration difficulty
- 256×64 resolution with 16 gray scales delivers clear text and
detailed graphic display
- Wide operating temperature range adapts to indoor, outdoor,
industrial and automotive environments
- High contrast ratio (>2000:1) and wide viewing angle (>160°)
ensure excellent readability in all scenes
- SSD1322 driver IC supports precise brightness adjustment and
low-power management
- 40,000-hour long lifetime meets long-term operation requirements of
industrial devices
- Strict tolerance control ensures consistent product dimensions for
mass production assembly
- Anti-static design and reliable power-on/power-off sequence
protection extend module service life
- Compliant with reliability tests including high/low temperature,
humidity and thermal shock
Electrical Specifications
Power Supply Pins: VCI (Operation Power, 2.8-3.5V), VDD (Core Logic, 2.4-2.6V), VDDIO
(I/O Power), VCC (Panel Power, 14.5-15.5V), VSS/VLSS (Ground)
Key Pins: IREF (Brightness Adjustment), VCOMH (COM Signal High Level), VSL
(SEG Signal Low Level)
Interface Pins: BS0/BS1 (Interface Selection), RES# (Reset), D/C# (Data/Command),
E/RD#, R/W#, D0~D7 (Data Bus)
Typical Current: 1.8-2.25mA (VCI), 39.8-80mA (VCC, depends on display area)
Pin Definition
| PIN NO. | Symbol | Description |
|---|
| 2 | VSS | Ground of Logic Circuit; Reference for all voltage signals |
| 3,29 | VCC | Power Supply for OEL Panel; Most positive voltage supply pin of the
chip |
| 4 | VCOMH | Voltage Output High Level for COM Signal; Connect tantalum
capacitor to VSS |
| 5,28 | VLSS | Analog Ground Pins; Should be connected to VSS externally |
| 22 | IREF | Current Reference for Brightness Adjustment; Connect resistor to
VSS (≤10uA) |
| 24 | VDDIO | Power Supply for I/O Pin; Connect to VDD or external source |
| 25 | VDD | Power Supply for Core Logic Circuit; External 2.4-2.6V or internal
from VCI |
| 26 | VCI | Power Supply for Operation; ≥VDD and VDDIO, connect to external
source |
| 27 | VSL | Voltage Output Low Level for SEG Signal; Leave open if not used |
| - | BS0/BS1 | Interface Selection Pins; Switch between 3-wire SPI/4-wire
SPI/parallel modes |
| - | RES# | Power Reset for Controller and Driver; Low level activates reset |
| - | D/C# | Data/Command Control; High=Data, Low=Command |
Application Scenarios
- Industrial control systems (PLC panels, sensor data displays,
equipment status indicators)
- Automotive electronics (in-vehicle displays, secondary control
panels, tire pressure monitors)
- Portable electronic devices (handheld meters, industrial detectors,
data loggers)
- IoT terminals and smart sensors (environmental monitors, wireless
controllers)
- Medical devices (portable medical monitors, diagnostic equipment)
- Consumer electronics (specialized remote controls, industrial-grade
POS machines)
- Embedded systems (microcontroller-based devices, industrial
embedded displays)
- Test and measurement equipment (precision instruments, calibration
tools)
- Aerospace and military auxiliary displays (high-reliability
requirement scenarios)
Customization Options
- Interface Optimization: Custom interface parameters and timing characteristics to match
specific MCU
- PCB Customization: PCB size, shape and pin layout adjustments for special
installation needs
- Polarizer Customization: Anti-glare, wide-view polarizer options for outdoor and industrial
use
- Brightness Tuning: Custom brightness levels (60-80 cd/m²) to meet application
requirements
- Packaging Solution: Custom anti-static, vacuum packaging with desiccant for long-term
storage
- Warranty Extension: Extended warranty options (18~24 months) for bulk orders (500+
pcs)
- Labeling Service: Custom part number or logo printing on PCB for inventory
management
- Software Configuration: Custom initialization commands and display parameter settings
Handling Notes
Electrostatic Protection: Use anti-static bracelets and grounded tools. Avoid assembly in
dry environments (45%~60% RH). Do not touch pins, PCB patterns or
polarizer with bare hands.
Polarizer Protection: Clean polarizer with Scotch Mending Tape No.810. Avoid water,
alcohol, ketone and aromatic solvents.
Storage Conditions: Store in anti-static bags at 23±5℃, humidity ≤45±20%RH. Avoid
direct sunlight and extreme temperatures. Use within 6 months.
Operation Precautions: Follow correct power-on/power-off sequences (100ms delay). Avoid
fixed pattern display for long periods to prevent afterimages.
Soldering Tips: Control soldering temperature and time. Ensure reliable soldering
to prevent poor contact and signal instability.
Mechanical Protection: The panel is glass-based; avoid mechanical impacts, pressure and
excessive bending of COF.
Light Shielding: Shield OLED driver from light in product design to prevent
malfunction caused by light exposure.
Power Supply: Install 0.5A overcurrent protection on VDD circuit. Do not exceed
absolute maximum ratings.
Product Images
Product Applications
Production Process
Shipment & Payment
