Metal Textiles Insulation Blanket Mesh

Quick details of Metal Textiles Insulation Blanket Mesh

• We also have other alloys available, such as Monel, 309SS, etc., where applications are corrosive or special atmospheres.
• The common wire diameters used for insulating blankets are .008″, .00095″, and .011″.Where greater strength is needed because of frequent removal such as turbines or stress relieving blankets, .011” is used. For less frequent remove, .008″ is used. For applications which involve temperature extremes such as furnaces, the .011″ diameter is recommended to reduce the weakening caused by oxidation or furnace atmosphere conditions.
• The common density (openings/inch) used is 60, as it provides the optimum balance between large openings for economy, yet small enough openings to prevent tufting. 76 density is also available.
• Yield listed is for single ply. Knitted mesh is tubular in construction (double-ply) and is typically cut open by the user and installed as a single ply.
• Insulating blanket mesh is made in widths of two-ply stocking from 1″ to 43″. However, most applications use widths of 12″, 18″, 24″, 30″, or 42″

Specification of Metal Textiles Insulation Blanket Mesh

Features of Metal Textiles Insulation Blanket Mesh

The insulation media for blankets, covers, or jackets is typically a pliable, heat-resistant material such as asbestos, fiberglass, ceramic fibers, etc. Although this material has high temperature resistance qualities, it does not have the physical qualities to: Retain physical shape and strength Protect from exterior abrasion Support for lacing hooks and such devices