5-19 mm PP Strap Making Machine Single Screw PP Strap Production
Line PLC Control System
PRODUCT DESCRIPTION OF PP STRAPPING EQUIPMENT:
The whole machine of the PP Strap Making Machine adopts a PLC control system, a PLC touch screen control system, which replaces the
potentiometer to control the speed regulation, can memorize the
production parameters, and is more convenient to operate. PLC touch
screen control system, which replaces the potentiometer to control
the speed regulation, can memorize the production parameters, and
is more convenient to operate.
1. Primary Materials
PP:
- Comprising over 95% of the tape's raw material, it is the core
raw material.
- Features: Lightweight, abrasion-resistant, corrosion-resistant,
high tensile strength, and low cost.
2. Common Additives**
To enhance performance, the following additives may be added during
production:
PP fillers (such as calcium carbonate):
- Reduce costs and increase hardness and density, but excessive
amounts can affect flexibility.
- PP masterbatch**:
- Provides colors (commonly available in green, white, red, black,
blue, yellow, and transparent) for easy identification or labeling.
- Anti-aging agents**:
- Extend the tape's lifespan during outdoor use and prevent UV
degradation.
.
EXTRUSION PARAMETERS TABEL
| Model | PP-2 | PP-4 | PP-6 | PP-8 | PP-10 | PP-12 |
| Raw material | PP polypropylene new material/recycled material |
| Number of tapes | 2 | 4 | 6 | 8 | 10 | 12 |
| Width(mm) | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 |
| Thickness(mm) | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 |
| Line speed(m/min) | ≧260-300 |
| PLC control system | PLC | PLC | PLC | PLC | PLC | PLC |
| Screw Model | 90 | 110 | 125 | 135 | 135 | 135 |
| Reducer model | 200 | 220 | 250 | 280 | 280 | 280 |
| Drying barrel (kg) | 100 | 150 | 200 | 200 | 200 | 200 |
| Winding machine | Automatic winding machine /Semi-automatic winding machine |
| Screen Changer | Automatic/Manua |
| Production capacity 24H | 2.5-3T | 6-7T | 8-9T | 10-11T | 12-13T | 13--14T |
Features of embossing wheel:
1. The embossing wheel is nitrided and heat-treated to achieve a
surface hardness of 60 degrees, which is strong and durable. The surface texture of the strapping
belt pressed out by this embossing machine is clear and rough
enough, and the automatic strapping machine uses strong belt
feeding.
2. The upper and lower flower wheels of the embossing machine are equipped with synchronous gears to ensure
synchronous rotation of the upper and lower wheels, ensuring that the flower spinning
on both sides of the strapping tape is completely consistent,
increasing the beauty and transparency of the strapping tape.
3. When assembling the upper and lower flower wheels, a fixed gap
is left to prevent collision, which extends the service life of the flower wheels.
Finished PP packing straps:
PP strapping tape is suitable for baling machines:
Fully automatic strapping machine
Semi-automatic strapping machine
High-speed ultra-thin strapping machine
Handheld electric strapping machine
Manual strapping machine (iron buckle)
About th SERVICE:
We provide comprehensive technical support and service for our PP Strap Making Machine. Our team of experienced technicians can provide a variety of
services, including:
Pre-sales:
1.Layout plan of PP Strap Making Machine.
2.Analysis of the cost of PP Strap Making Machine.
3.Raw materials that can be used for PP Strap Making Machine.
After-sales service:
1.Water and electricity circuits of PP Strap Making Machine, circuit drawings, etc.
2.Installation, commissioning and training of PP Strap Making Machine.
3.Maintenance service of PP Strap Making Machine.
4.Regular maintenance and repair
5.Troubleshooting and diagnosis
6.Software updates and upgrades
7.Spare parts and accessories
8.Training and technical advice
FAQ:
Q:What is the voltage of PP Strap Making Machine?
A:380V/50HZ, we support customization
Q:What is the length of the PP strapping belt?
A: L:36 M.
Q:Where is the PP Strap Making Machine produced?
A:We are from China.
Q:Can PP Strap Making Machine provide after-sales service?
A:Yes, we have professional after-sales engineers who provide
24-hour online guidance.
Q:Is the quality of PP Strap Making Machine stable?
A:We have 30 years of manufacturing experience, and have their own
PP packaging belt production plant, equipment quality is stable,
the process is worth choosing.
Q:Does PP Strap Making Machinesupport customization?
A:We are a manufacturing plant that can customize model size,
extrusion capacity, voltage and so on according to customer
requirements.
Q:What does the wrapping machine part of the PP Strap Making Machine look like?
A:Equipped with automatic wrapping machine/semi-automatic wrapping
machine.
