High-speed PP strapping equipment PP strapping production line with
PLC control system
DESCRIPTION OF PP STRAPPING EQUIPMENT:
PP strapping production line is a specialized equipment combination
for producing polypropylene (PP) strapping. Through a series of
continuous processes, it transforms PP raw materials into
high-strength, flexible strapping products, which are widely used
in logistics, packaging, building materials, fruit processing, and
home appliances.
Core Equipment Components of a PP Strapping Production Line:
1. Extruder
Function: Heats and melts PP raw material (granular, with optional
color masterbatch, fillers, etc.) to plasticize it, and
continuously extrudes the melt through a rotating screw.
Screw: Screw diameter (selected according to capacity requirements,
commonly 30mm), length-to-diameter ratio (generally 25:1-30:1 to
ensure full plasticization of the raw material), heating power
(segmented temperature control to adapt to the raw material's melt
profile).
2. Die (Extrusion Die)
Function: Extrudes the melt conveyed by the extruder through a die
of a specific shape (usually a flat slit) to form a preliminary
strip-shaped billet (thickness and width must match subsequent
processes).
Features: The die gap is finely adjustable to ensure uniform billet
thickness; the internal flow channels are smooth, reducing melt
resistance and preventing raw material degradation.
.
EXTRUSION PARAMETERS TABLE
| Model | PP-2 | PP-4 | PP-6 | PP-8 | PP-10 | PP-12 |
| Raw material | PP polypropylene new material/recycled material |
| Number of tapes | 2 | 4 | 6 | 8 | 10 | 12 |
| Width(mm) | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 |
| Thickness(mm) | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 |
| Line speed(m/min) | ≧260-300 |
| PLC control system | PLC | PLC | PLC | PLC | PLC | PLC |
| Screw Model | 90 | 110 | 125 | 135 | 135 | 135 |
| Reducer model | 200 | 220 | 250 | 280 | 280 | 280 |
| Winding machine | Automatic winding machine /Semi-automatic winding machine |
| Screen Changer | Automatic/Manua |
| Production capacity 24H | 2.5-3T | 6-7T | 8-9T | 10-11T | 12-13T | 13--14T |
Introduction to the stretching process:
Core process: By using the speed difference between two or more
sets of stretching rollers (the rear roller speed is higher than
the front roller), the cooled billet is axially stretched (the
stretching ratio is usually 3-8 times), causing the PP molecular
chains to align in an oriented manner, significantly improving the
longitudinal strength and toughness of the strapping.
Auxiliary conditions: Some production lines will install preheating
rollers before stretching to heat the billet to above its glass
transition temperature (approximately 80-120℃) to enhance the
stretching effect.
PP strapping belt is suitable for strapping machines:
Fully automatic strapping machine
Semi-automatic strapping machine
High-speed strapping machine
Handheld electric strapping machine
Manual strapping machine (iron buckle)
ABOUT AFTER-SALES
We provide comprehensive technical support and service for our PP
Strap Making Machine. Our team of experienced technicians can
provide a variety of services, including:
Pre-sales:
1.Layout plan of PP belt making machineP.
2.Analysis of the cost of PP tape making machine.
3.Raw materials that can be used for PP tape making machine.
After-sales service:
1.Water and electricity circuits of PP belt making machine, circuit
drawings, etc.
2.Installation, commissioning and training of PP belt making
machine.
3.Maintenance service of PP belt making machine.
4.Regular maintenance and repair
5.Troubleshooting and diagnosis
6.Software updates and upgrades
7.Spare parts and accessories
8.Training and technical advice
FAQ:
Q:What is the voltage of PP strapping equipment?
A:380V/50HZ, we support customization
Q:Can the PP strapping production equipment be customized according
to the factory length?
A:Yes, we can customize the length according to the customer's
factory size.
Q:Where is the PP strapping equipment produced?
A:We are from China.
Q:Can PP strapping equipment provide after-sales service?
A:Yes, we have professional after-sales engineers who provide
24-hour online guidance.
Q:Is the quality of PP strapping equipment stable?
A:We have 30 years of manufacturing experience, and have their own
PP packaging belt production plant, equipment quality is stable,
the process is worth choosing.
Q:Does PP strapping equipment support customization?
A:We are a manufacturing plant that can customize model size,
extrusion capacity, voltage and so on according to customer
requirements.
