Bronze Bearing perfo 3008100H Sleeve Bronze Bushing

Rolled Bronze Bushing Sliding Bearing with Oil Hole and Oil Grooves, Special Designed Split Bronze Bearing

ZR-092 Bronze bushings are Suitable for MBB-Palfinger.The bearings are manufactured of a cold formable homoge-nous bronze, which because of this will obtain exceptional material pro-perties. The standard sizes are fitted with holes, which are dispersed in a special way over the whole bearing-surface.

These holes with sepcial designed oil grooves serve as lubricant reservoirs i.a. to rapidly build up a lubrication film in the moment of start and therewith reduce the start friction.

• Surface can be incorporated with oil holes and oil grooves linear. Particularly suitable for oscillating bearing.
• High load capacity and long life.
• Wide temperature range
• Easy to assemble
• Works well in dirty environments
• Cheap than traditional bronze bush, cost saving.

Operation Performance

Application

Mounting Suggestion

• Housing ØH7

• Bushing inner-Ø after mountingH9

• Shaft tolerance f7

• Housing: Mounting bevel min. 1.5 mm x 15-45°

• Shaft Material: Steel, hardened or untempered, surface roughness ≤ Rz 4-6

• Shaft: Mounting bevel 5 mm x 15°, edges rounded

• The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may

• be necessary when mounting.

• Stick-in: Adhesive should not contact the sliding surface