12,000Gs Grated Permanent Magnetic Separator dry magnetic separator
separation, reliability Removal of the intense magnetic iron
contamination, weak magnetic iron pollutants minerals, chemical
product, medicine, food, plastics, ceramics, building materials
Working Principles of Grated Permanent Magnetic Separator
When the material flows through the separator, the ferromagnetic
material in it is to be adsorbed on the magnet bar in internal
permanent magnet, finally, the separation of the ferromagnetic
material and material is finished. The dry magnetic separator can
be used for separating iron from the materials with high apparent
viscosity and poor fluidity.
Performance and Characteristics of Grated Permanent Magnetic
Separator
The powerfrugal magnetic separator is designed on the shape of
discharge valve; the rotating speed is just controlled by simple
circuit without electrical excitation, the attenuation of magnetic
force for bar magnet is less than 5% within eight years and service
life is more than 15 years and is reused also. Bar magnet made from
the third international generation composite rare-earth
strong-magnetic alloys Nd-Fe-B is well established for its high
coercive force, high remanence, magnetic force, large handling
capacity, adjustable rotating speed, high sharpness of separation,
reliability service, long service life, easy operation and
installation.
1. The peak magnet field intensity is 12,000Gs.
2. Covered with stainless steel shell, high gradient magnetic
separator is featured by strong tension, big pulling and good
separation precision.
3. Compact structure, applicable to all kinds of bulk materials and
little stoppage.
4. Big intense capture power, strong force, reducing frequency of
slag discharge and labor intensity effectively.
5.Removal of the intense magnetic iron contamination, weak magnetic
iron pollutants (such as rust, iron filings) and other small
magnetic impurities.
6.It can be suitable for the materials with viscosity and poor
fluidity strong force because of deagglomeration, and especially
for efficient removing iron existing in superfine powder.
7.The temperature of standard products ≤ 80 °C, the separators can
be used up to 200 °C of the high-temperature products.
8. We can offer permanent magnetic separator which is suitable for
different end interface and different magnetic density according to
the requirements.
Application Fields of Grated Permanent Magnetic Separator
Applicable to remove iron from granules and powders of new
material, minerals, chemical product, medicine, food, plastics,
ceramics, building materials, coal and refractory or can be in
conjunction with the various belt conveyor, vibrating conveyer,
electro-vibrating feeder, discharge chute,irregular hopper etc.
