The test results clearly detect defects such as sand holes and
cracks inside the aluminum castings.
Easy operation, the detection standard setting of the new product
only takes 5~10 minutes.
Programmable, measurable, and image-saving functions based on
ergonomics.
The optical door of the product is equipped with an interlocking
function, and the rays cannot work
normally if any of the doors are not closed.
The multi-functional load platform rotates and moves 360°.
Versatile, customizable tooling operations.
C-type swing arm six-axis linkage detection method, Support no dead
angle detection.
Real-time dynamic imaging is realized during product inspection,
and the display realizes real-time
monitoring.
Multi-panel modular observation point setting.
The equipment is mainly used in aluminum castings, iron castings;
automotive parts; hardware, refractory and other testing. Based on the Automated Optical
Inspection developed on the image detection technology system, X-ray fluoroscopy is used to convert
visible light images, flat panel detectors are used to acquire image information, high-definition
imaging, measurable size, data storage and automatic programming step detection.
X-ray leakage amount | ≤1usv/h |
| Dimension | L2030×W1600×W2100mm |
| Stage size | φ500mm |
| Imaging area | 433.7mm*433.7mm |
| Resolution | 2816*2816/ 3.24Lp/mm 15fps |
| Max Tilt Angle | ±30° |
