CR-M110DC4L ABB Plug in relay module Dc coil Four normally open
contacts
Product Overview
The ABB CR-M110DC4L is a high-performance plug-in control relay
module in the ABB CR-M series, specifically designed for signal
isolation, logic expansion and load driving in industrial
automation, process control, rail transit and DC control systems.
This product adopts a modular structure and is used in conjunction
with CR-P series sockets. It supports tool-free quick plugging and
unplugging replacement, significantly improving the efficiency of
system maintenance. It is equipped with 4 sets of normally open
(NO) silver alloy contacts, which have a high electrical life. It
is also provided with a green LED indicator light to display the
working status of the coil in real time, facilitating on-site
debugging and fault diagnosis.
Key features
✅ dc dedicated, stable and reliable
Optimized for 110 V DC control systems, the coil has strong surge
resistance and is suitable for PLC output, DCS systems and
battery-powered scenarios.
✅ Plug and play, high maintenance efficiency
The relay body is separated from the base. When a fault occurs,
there is no need to disconnect the wires. Replacement can be
completed within 3 seconds, minimizing downtime to the greatest
extent.
✅ high load capacity contacts
The contacts are made of AgNi (silver-nickel alloy) material, which
is resistant to electric arcs and oxidation
The rated switching capacity reaches 6 A / 250 V AC (AC-15) or 2 A
/ 30 V DC (DC-13).
✅ state visualization
It is equipped with a built-in green LED indicator light to
visually show whether the coil is powered on, enhancing the
maintainability of the system.
✅ flexible installation, complete certification
Compatible with various CR-P series sockets (screw/spring
terminals)
Supports 35mm DIN rail mounting
It has passed international certifications such as CE, UL, CSA and
CCC, and complies with the IEC/EN 61810-1 standard
Basic parameters
Model: CR-M110DC4L
Series ABB CR-M plug-in relay
Coil rated voltage: 110 V DC (allowable fluctuation range: ±10%)
The coil power consumption (holding) is approximately 1.4 W
Contact configuration: 4 NO (4 groups of normally open contacts)
Contact material AgNi (silver-nickel alloy)
Rated working current • AC-15:3 A @ 230 V AC
• DC-13:2A @ 30 V DC
The maximum switching voltage is 250 V AC / 30 V DC
The mechanical life is ≥ 10⁷ operations
Electrical life (AC-15) ≥ 100,000 times (3 A, 230 V AC)
The action time is ≤ 12 ms
Release time ≤ 8 ms
Insulation voltage (Ui) : 250 V
Pollution level 2
Protection grade IP20 (after installation with a socket)
Operating temperature range: -25°C to +55°C
Installation method: Insert into the CR-P series socket (DIN rail
installation)
Dimensions (width × height × depth) : 17.5mm × 60mm × 90mm
Weight ≈ 60 g
Typical application scenarios
Industrial automation
It is used for the starting, stopping and protection of
medium-voltage motors, such as water pumps, fans, compressors and
other equipment.
Power transmission and distribution
Load switching and protection in scenarios such as medium-voltage
switch cabinets and substations.
Energy and infrastructure
Auxiliary control of photovoltaic inverters, pumping stations of
water treatment plants, and backup power switching systems.
OEM equipment integration
As a standard component embedded in the OEM control cabinet, it
enhances the reliability of the entire machine.
Product Images
Related Products
| CR-M110DC4L | CR-M1230AC4L |
| CR-M124DC4L | CR-M1240AC4L |
| CR-M148DC4L | CR-M2230AC4L |
| CR-M1110DC4L | CR-M2240AC4L |
| CR-M1220DC4L | CR-M1120AC4L |
| CR-M210DC4L | CR-M1400AC4L |
| CR-M224DC4L | CR-MH110DC4L |
| CR-M248DC4L | CR-MX124DC4L |
| CR-M2110DC4L | CR-P110DC4L |
| CR-M2220DC4L | CR-Z1230AC4L |
