SH0085B Engine coolant corrosion tester hot plate
SH0085B antifreeze corrosion tester is designed and manufactured in
accordance with the requirements of the petrochemical industry
standard of the People's Republic of China, SH/T0085 Engine Coolant
Corrosion Test Method. It is suitable for measuring the corrosion
degree of high boiling point and low boiling point engine coolant
and its concentrate on typical metal test pieces according to the
test method of SH/T0085 ASTMD1384 standard. After the upgrade of
SH0085 corrosion tester, the instrument is equipped with a silent
air compressor, There is no need to manually equip the air source.
The SH0085B engine coolant corrosion tester is upgraded from the
original one. It can observe the experimental state while doing the
experiment. At the same time, the heating method uses an electric
heating plate to heat without adding medium.
Standard: SH/T 0085 ASTM D1384
Main technical specifications and parameters
| Heating method | electric plate heating |
| Beaker | made of heat-resistant glass. High-type mouthless 1000ml,
conforming to SH/T0085 standard |
| Gas diffusion pipe | the diffusion head is made of sand-cored glass, and the pipe
diameter is made of heat-resistant glass. |
| Reflux condensate pipe | water-cooled type, with the length of sleeve not less than 400mm. |
| Temp control range | RT - +100 ℃ ± 0.1 ℃ |
| Air flow meter | 30 - 300ml/min |
| Timer | 0 - 9999 h |
| Number of test holes | 3 |
| Working power supply | AC220V ± 10% 50Hz |
| Ambient temperature | -10℃ - +35 ℃ |
| Relative humidity | ≤ 85% |
| Power consumption of the whole machine | no more than 2000W. |
| Instrument size | 600 * 400 * 630mm |
| Instrument Weight | 28 kg |
| Package size | 710 * 550 * 810mm |
| Package weight | 46.2 kg carton |
Test piece size and material:
SH/T0085 Engine Coolant Corrosion Test Method (Glassware Method)
Group Test Piece
● 50 * 20 * 2mm (20 # steel, brass sheet, red copper sheet)
● 50 * 25 * 3.5mm (cast aluminum sheet, solder sheet, cast iron
sheet)
● Single center hole: φ 7.0mm
Supporting products:
Brass washer, insulating washer, steel washer, insulating sleeve,
brass bracket
Note: The appearance pictures, dimension, volume and weight of the
instrument are for reference only. If there are any updates to the
instrument, they may be slight changes without prior notice.
Shandong Shengtai Instrument Co., Ltd. provides the following
quality assurance for the instruments sold to you:
----The provided instrument materials are brand new, meet national
quality standards, and have a manufacturer's certificate of
conformity;
----The materials and main components provided meet the technical
requirements specified in the technical documentation;
----The overall quality assurance period of the equipment is one
year (excluding normal wear and tear of vulnerable parts).
----We are responsible for free maintenance of any instrument
quality issues that occur during the warranty period. Due to
equipment malfunction caused by the user's responsibility, we are
responsible for repairing and charging reasonable fees.
----Lifetime discounted supply of parts for equipment, and lifetime
maintenance and repair of the entire machine.
----After the expiration of the warranty period, if the user needs
maintenance and technical services, we will only charge a cost fee.
Packing list
| S/N | Name | Quantity | Unit | Remarks |
| 1 | Host | 1 | Unit | |
| 2 | Power cord | 1 | Root | |
| 3 | Corrosion test piece | 3 | Group | |
| 4 | Condenser tube | 3 | Group | |
| 5 | Gas diffusion tube | 3 | Group | |
| 6 | Fuse tube | 1 | Piece | |
| 7 | Instruction | 1 | Copy | |
| 8 | Certificate warranty card | 1 | Copy | |
