Model:ECO-27702
Outer Plate: SUS201 stainless steel, 0.6 material thickness
Stove:ACCD Shabaf, 3.3kw/ 1.75kw/1.0kw
Voltage: 220V-240V,50Hz
Stove rack: Cast Iron Frame
Knob: Metal Knob-C
Adapter: A3 iron connector
Valve: Pulse valve (without flameout protection)
Product size :590*510mm
Carton: 650*550*150mm,9.25kg
Volume: 0.05
20GP/40 HQ: 550/1360pcs
In Stock:
✔ Ready to ship
✔ Monthly supply capacity:3000pcs
✔ Total 4 warehousestotal, covering an area of 20,000m²
Detail Display:
✔Knob control for manual ignition.
✔More concentrated fire.
✔Stir-frying fire--Frying fire--Boiled fire--Soup making fire--Keep
warm fire
✔Cooking versatility:Gas stove and electric stove integration, cover all cooking needs.
✔Flexible energy use
✔Efficient cooking
✔Non-slip base
✔Air valve interfacee
Operation:
♦Lighting Burners- Simply press the knob in, turn anticlockwise to
maximum and theburner will ignite. Before releasing knob, ensure a
fame is established, if the burnerfails to ignite, put into off
position and try again.If in case of a power failure or failure of
the ignition, a match or lighting devise can beused.
♦Care must be taken when using this method.The device shall not be
operated for more than 15s. lf after 15s the burner has not
lit.stop operating the device and open the compartment door and/ or
wait at least 1 minbefore attempting a further ignition of the
burner.
Please see the attached instructions for details!
Suitable For Any Cookware:
✔Aluminum panCasserole
✔Casserole
✔Ceramic pot
✔Enamel pot
✔Glass pot
✔Stainless steel
✔Tin foil
✔Medical stone
Burner configuration:
FAQ:
Q:What should I do if my gas stove won't ignite?
A: 1,check that the gas source is on (check if the gas valve and meter
are in arrears/power off).
2,check that the burner cap is securely in place and that the flame
outlet is not clogged with oil.
3,If the ignition pin doesn't spark, check that the battery (or power
supply) is dead, or contact after-sales service(+86 13798034390)
for a replacement pin.
Q: Is it normal for the flame to be yellow or red?
A: Yellowing may indicate a clogged flame hole or insufficient air
intake from the damper. Clean the flame cover and adjust the
damper. Redness is usually caused by high humidity or excessive
cooking fumes and is a temporary phenomenon.
Q: How do I clean the burner cap and nozzle?
A: After the stove has cooled, remove the burner cap and use a fine
needle to clear any carbon buildup in the burner holes. Clogged
nozzles require specialized tools; avoid disassembling them
yourself.
