Product Description:
YJJ MF5806E1 Flow Sensor Is Used In Medical Oxygen Supply Systems
Features:
MF5806E1 flow sensor is a dedicated MEMS flow sensing chip for
medical oxygen inhalation devices. It is mainly used in medical
central oxygen supply systems, emergency oxygen supply, and oxygen
inhalation scenarios such as operating rooms and intensive care
units. Here is the core parameter and usage description of it:
Core parameters
Sensor type: MEMS flow sensing chip
Application fields: Medical oxygen inhalers (such as MF5806 series)
Applicable scenarios: Operating rooms, intensive care units,
emergency centers, respiratory departments, etc.
Measurement range: Needs to be combined with specific models (such
as the MF5806 series supports gas mass flow monitoring)
Usage description
Medical oxygen supply monitoring: Real-time monitoring of oxygen
flow to ensure oxygen supply safety
Emergency equipment: Used for rapid adjustment of oxygen inhalation
volume during emergencies
Precise control: Suitable for medical scenarios with high
requirements for flow accuracy
This sensor achieves high precision and miniaturization through
integrated MEMS technology, meeting the stability and reliability
requirements of medical equipment.
The MF5806E1 flow sensor is one of the electromagnetic flowmeters
produced by Mecanica Sistemas S.A. The following is the description
of its key parameters:
Measurement accuracy
Standard accuracy: ±0.5%
Low flow rate characteristic: Suitable for low flow rate
conditions, with high stability
Medium requirements
Electrical conductivity: ≥ 5 μs/cm for liquids (such as water,
sewage, acid-base solutions, etc.)
Bore range
Integrated/Discrete type: DN10 - DN500mm
Electrode material
Optional materials: 316L stainless steel, titanium, tantalum,
tungsten carbide (WC), platinum iridium (Pt), etc.
Lining material
Optional types: Chloroprene rubber, polyurethane rubber,
polytetrafluoroethylene (PTFE), F46, PFA, etc.
Power Supply and Output
Power Supply: 100~240V AC, 12V/24V DC, Battery or Solar Power
Supply
Signal output: 4-20mA DC, frequency/pulse, relay output
Communication Protocol
Supported: RS485/RS232 (Modbus protocol), HART, Profibus-DP/PA
Installation and Protection
Connection methods: Flange, clamp type, thread, clamp ring
Protection level: IP65 (for integrated type), IP67/IP68 (for
split-type sensors)
Application scenario
Suitable for precise measurement of liquid flow in complex working
conditions with high requirements, such as industrial wastewater
and chemical liquids.
Specifications:
| Standard accuracy | ±0.5% |
| Low flow rate characteristic | with high stability |
| Electrical conductivity | ≥ 5 μs/cm |
| Integrated/Discrete type | DN10 - DN500mm Electrode material |
