| Product Type | Egg Tray Machine |
| Processing Type | Pulp Molding Machine |
| After-sales Service | Provided Engineers available to service machinery overseas |
| Application | egg tray,fruit tray,bottle tray |
| Fuel | Coal, Natural Gas, Disel, LPG and so on |
| Keyword | egg box/tray machine |
Egg box machine is composed of the following sections:
1. Egg box/Tray Pulping System:
Put the waster paper into the hydrapulper , the paper and water
will mix in hydrapulper ,then go to the refiner machine ,refiner
machine make the pulp more small and uniform ,then the pulp pump
absorb the pulp to the pulp pool .after the second mix in the pulp
pool ,the pulp will go to the form machine pulp tank .
2. Egg box/Tray Molding Forming System :
The Egg Tray Molding Forming System consists of various equipment
and dies.
The wet forming section consists of a series of wire screen covered
wet forming dies mounted on a molding drum, and a matching set of
transfer dies mounted on a transfer mechanism.
The egg tray forming die is made up of rigid corrosive resistant
metal or ABS engineering plastic and consists of many component
parts that are drilled with small drainage holes and covered by
prior to formed stainless steel screens.
The forming die, mounted on the molding drum is rotated at a
uniform speed, immersing it in a taper flow vat containing the pulp
slurry of about 1% consistency of fibers in recycled water. A
vacuum system attracts the fibers to deposit on the forming die
screens as the suspending recycle water is drawn through the screen
and drainage holes.
The vacuum pump will offer the vacuum to make the forming mould
absorb the pulp from the pulp tank. One PLC cabinet will control
the pulp absorb time ,the finished product will be shaped on the
forming mould ,then the transfer mould transfer the products to the
drying line ,the air compressor will give the air to blow the
products ,then the products will drop down from the mould .Then the
products is delivered to the drying line automatically; the water
will go back to the water pool recycled.
3. Egg box/Tray Drying system (can use gas,dissel,coal for Boiler
burner)
There are burners and blowers on the two sides of the drying line.
Burner creates the hot air and the blower increases it. There will
be hot air mouth in the drying line also blow the hot air. The
drying line is protected by the insulation board. The temperature
inside the oven can reach 200 degree.
4. Egg box/Tray Automatic Stacking Machine:
After drying line ,the egg trays go to the automatic counting and
stacking system. You can preset the quantity of one pile ,such as
100pcs or 200pcs, when the quantity no is done, the counting device
will be alarmed. And the products stacked at the same time. You can
packaged them directly .
Our Machine Advantages:
1. Controlled by automatic computer software
2. No need for installation, machine can start running only after
connecting some pipes, power and water, and preparing the material
3. Some parts are Germany brand or other famous brand
4. Our egg tray machine can make different trays at same time by
using different moulds
5. Besides egg tray, fruit trays, our machine also can produce
industrial package
6. All installation and debugging work will be done before
shipment.
7. 20 years' experience on egg tray machine
8. 2 years warranty time
