FAQ

Q1: What exactly does the model “330101‑00‑12‑90‑02‑00” signify?
A1: The “330101” is the base model for an 8 mm probe in the 3300 XL series. The subsequent numbers denote options: for example in similar

models: “‑00” group designation, “12” case/length option, “90” likely total length option (e.g., 9.0 metres), “02”

connector/cable variant, “00” agency/approval. While I didn’t locate a public sheet for exactly

“90‑02‑00” in the materials found, the pattern is consistent

with other 330101 variants.

Q2: What measurement range and performance can I expect?
A2: Performance depends on the probe size and system configuration. For the 3300 XL 8 mm system, the datasheet shows

typical linear range from about 0.25 mm up to ~2 mm (10 to ~80 mils) or more depending on target and

gap. For radial vibration applications the precise gap, target size,

and system setup will affect sensitivity.

Q3: Is this probe compatible with my existing 3300 or older 3000 series system?
A3: Yes, the 3300 XL series is designed for backward compatibility mechanically and electrically

with many older 3300 probes (5 mm or 8 mm) when used with compatible extension cable

and Proximitor. However, mixing non‑XL and XL components may

reduce performance to the lower spec of

the older system.

Moore Automation are still working and able to shipping worldwide.

Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you.

If you have any questions, please feel free to contact us. We can supply various automation parts. If you want to buy parts, please send the part model to my email and I will reply to you immediately after receiving it.

Hope anyone enquire from us.

We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system.

Distributed control systems, programmable controllers, panel controller and drive!

* Our mission is to help you!
* Reduced maintenance costs!

We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help

supporting your existing control systems.

We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have

undergone rigorous testing and certification!