| SPECIFICATION | CABLE NAME | EV Cable |
| CABLE SPEC | 2C×80mm2+1C×25mm2+2C×4mm2+(3C×0.75mm2)(P2)+(7C×0.75mm2) |
| RoHS Compliant |
| Item | A : 2C×80mm2 | B : 1C×25mm2 | C : 1C×4mm2 | D:(3C×0.75mm2)(P2) | E:(7C×0.75mm2) |
| CONDUCTOR | Material | Bared copper stranded |
| Size | 2580/0.20 ±0.008mm | 798/0.20 ±0.008mm | 224/0.15±0.008mm
+10/1#Tinsel+1000D Kevlar | 40/0.15±0.008mm+
10/0.19mmTinsel+200DKevlar | 40/0.15±0.008mm+
10/0.19mmTinsel+200D
Kevlar |
| O.D.(Ref.) | 12.40±0.25mm | 7.00±0.20mm | 2.70±0.15mm | 1.40±0.10mm | 1.40±0.10mm |
| INSULATION | Material | Thermoplastic(EF2585,85±3A) |
| Min. average thickness | 1.60mm | 1.20mm | 1.00mm | 0.50mm | 0.50mm |
| Min.thickness at any point | 1.34mm | 0.98mm | 0.80mm | 0.35mm | 0.35mm |
| O.D. | 15.60±0.40mm | 9.60±0.30mm | 4.70±0.20mm | 2.50±0.10mm | 2.50±0.10mm |
| CABLING-1 | Filler | / | Cotton | Cotton |
| Material | / | AL-mylar(facing out) | Non-woven |
| BRAID | Material | / | Tinned copper | / |
| Size | / | 0.12mm,≥60% | / |
| In-JACKET | Material | / | TPE | TPE |
| Min. average thickness | / | 0.60mm | 0.60mm |
| Min.thickness at any point | / | 0.42mm | 0.42mm |
| O.D. | / | 7.20±0.25mm | 9.70±0.25mm |
| CABLING | Filler | Strengthed PP rope |
| Material | Non-woven(≥25% overlapping) |
| Assembly | 2C×80mm2+1C×25mm2+2C×4mm2+(3C×0.75mm2)(P2)+(7C×0.75mm2) |
| JACKET | Material | TPU |
| Min. average thickness | 2.80mm |
| Min.thickness at any point | 2.28mm |
| O.D. | 38.00+0.6/-1.00mm |
| ELECTRICAL CHARACTERISTICS | PHYSICAL PROPERTIES |
| Rated voltage:DC 1000V | Tensile strength:≥20MPa | High temperature pressure test:≤50% |
| Rated temperature:Jacket -40~90ºC | Elongation:≥300% | Heat shock test:No
crack |
|
Insulation -40~125ºC | Aged condition:110±1ºC×168h | Compatibility test:GB/T 33594 |
| Max. conductor resistance(20ºC): | Percent of original tensile strength:≤±30% | Crush resistance test:GB/T 33594 |
| A:0.242Ω/km B:0.78Ω/km C:4.95Ω/km
D&E:26Ω/km | Percent of original elongation:≤±30% | Curved around the test:GB/T 33594 |
| Insulation Voltage withstand(Core A&B,10m): | Flame test:GB/T 18380.12-2008 | Min. Bend radius:6*OD |
| AC 2.5kV/5min,leakage current ≤5mA | Artificial weathering test:GB/T 33594 | Abrasion resistance:≥2000times |
| Completed cable Voltage withstand(Core A to
A&B,10m): | Low-temperature impact test :-40ºC×16H,No crack | Resistance against chemicals:GB/T 33594 |
| AC 3.5kV/15min,leakage current ≤5mA | Chemical stress acid: N-Oxal-acid alkaline solution, N-sodium hydroxide
solution:GB/T 33594 |
| Min. Insulation resistance(20ºC, Core A to A&B):500MΩ.km | Vehicle rolling:Requirements and test methods should be consistent with GB/T
20234.1-2015 7.21 |
Company ProfilesFounded in 2004 with 9 million USD capital investment, our HQ
factory in Kunshan covers 14980 square meters.
In 2020 we established our Nantong facility with 100 million RMB
capital investment which covers 34000 square meters.
With ISO9001, ISO14001, IATF16949, ISO13485 system certificates,
all of our products have passed CCC, UL, CUL, CE, CSA, ETL safety
certificates. We are working with global customers in various
fields through our well-established sales system based on the
management principal HONESTY, INNOVATION and ENVIRONMENTAL
PROTECTION.
Certificates
Production Progress
Shipping
FAQ1.Q:What can you supply?
A: We do produce consumer electronics wires, hock
up wires, industrial cables, robot cables, ev charging cables,
new/green energy cables.
2.Q: What are the certificates do you get?
A: We have UL, CE, 3C, Dekra, CQC, TUV, Rohs,
Reach, ETL certificates.
3.Q:Can we get samples before ordering?
A:Yes, we are willing to arrange samples for you.
4.Q: What's your lead time?
A: Normally we can finish you orders in 2-3
weeks, and 5-6 weeks in peak season.
5.Q. How can you guarantee the product quality?
A: Always a pre-production sample before
mass production and final Inspection before shipment.
Major Customers
