Product Features:
High-precision probe
HTN display
Automatic sleep
Buzzer alarm
Support DOT3/4/5.1
Accurate measurement
Product specification parameter:
Product model:Xtruck-A01
Product size:155mm*30mm*25mm
Power supply mode: AAA battery* 1
Material: PP+metal probe
Product weight: 38.5g
Usage environment: 0~50°C Applicable to testthe brake fluid
performance of all models
Product introduction Used for brake fluid moisture detection and
intelligentdisplay.
1-When the moisture content is <1.5%, the screen displays
green,indicating that the moisture content is very low; please feel
free to use it.
2-When the moisture content is <3%, the screen displays yellow,
and the brake fluid performance is good; but it should be tested
frequently.
3-When the moisture content is >3%~4%, the screen displays red,
andthere is a dripping reminder sound; the brake fluid needs to
bereplaced immediately!
Notes:
1. The metal probe cannot touch any object wheninstalling the
battery.
2.After each test, please wipe the liquid on the metalprobe with a
dry cloth or paper towel.
3. lf the skin comes into contact with the brake fluid, washthe
skin thoroughly with water immediately.
4. Please do not expose the brake fluid to the air for a longtime,
because the brake fluid has strong water absorption
How to use?
Preparation before testing:
Unscrew the cap of the brake fluid reservoir and removethe
protective cover of the probe of the test pen. Press thepower
button lightly, and the screen will display.(lf youwant to change
the type of brake fluid detection, press andhold the button for 3
seconds until the brake fluid typeshows flashing, then short press
to switch the desiredtype,and wait for 3 seconds for the display to
no longerflash to complete the setting)
Testing water content:
1. Select the corresponding number DOT3/4/5.1 accordingto the type
of brake fluid to be tested.
2.lmmerse the metal probe at the front end of the test penin
parallel into the brake fluid in the reservoir, ensuringthat both
metal probes are in contact with the brake fluidsurface.
3. The performance of the brake fluid can be judged basedon the
water content on the display.
4.After the test is completed, all indicator lights will go
outafter 1 minute, and the test pen will enter power savingmode.One
battery can be used continuously for a longtime and consumes almost
no power.It is recommendedto keep this device in the vehicle at all
times so that youcan understand the quality of the brake fluid at
any timeand the operation is simple and quick.
What is packaging?
Brake Fluid Tester *1
Note that you need to prepare your own AAA battery (The test pen
does not contain batteries)
