Box Sample Drying Oven Of Powder Coating Line For Make Sample

Technical specification

Sample oven dimensions: L4500*W2600*H2200 (mm) external dimensions

1) The furnace plate is coated with high temperature glue at the connection between the furnace plates.

2) The furnace plate is connected as a whole through the inner and outer edges of the furnace corner, with a strong structure and an elegant appearance.

3) The furnace plate and furnace plate are joined, and the connection is coated with high temperature glue to prevent heat leakage and reduce energy consumption.

4) The top of the middle position of the furnace is equipped with a forced exhaust port to maintain the hot air in the furnace within the controlled range.

5) Insulation cotton:

The furnace body insulation layer is 100mm thick, using standard 100K Xisler rock wool, good insulation.

Sisler rock wool products have good high temperature thermal stability, durability and resistance to high temperature shrinkage; in the recommended use temperature range and normal working conditions, can be safe, stable and efficient for a long time.

6) Furnace plate: made of machine-made plywood, with tongue-and-groove plug-in type and single side door. The inner plate is made of T0.8mm galvanized sheet, the outer plate is made of T0.8mm galvanized sheet, and the supporting reinforcement ribs are made of 3# angle steel.

7) The furnace's interior corner is constructed with T1.2mm galvanized steel sheets. Both the decorative panel and cabinet body are built with pull-through screw fasteners, ensuring excellent thermal insulation while allowing easy disassembly and maintaining an aesthetically pleasing appearance.

Roof corner: The makeup board is made of T2.0mm galvanized sheet, and the makeup board and room body are all made of pull screw structure, which is easy to disassemble and assemble and has an aesthetic appearance.

8) Roasting oven base plate: The oven is designed to be 200mm above the ground, with a machine-made plywood base to prevent floor cracking caused by temperature leakage and energy waste.

9) Furnace temperature: Adjustable from room temperature to 220℃ with constant temperature control. Temperature uniformity is ±5℃.

The heating period should be ±15 minutes from the start to the end of the baking process (the duration may vary depending on the product thickness and powder specifications, with additional calculation required).

10) Double furnace door

1. Constructed with 2.0T galvanized steel plates reinforced by welding.

2. The furnace body and furnace door are welded with a 100mm door column.

3. The furnace door latch is made by using the car door lock method, which has an attractive appearance.

4. One-sided door opening of the oven.

11) Rail: Constructed with 50mm angle iron and square steel tubes, supported by 50mm square steel tubes

Our company operates strictly in accordance with the quality assurance system, ensuring that the equipment is manufactured with reasonable processes, materials and high-performance components, and that the equipment, after correct installation, normal operation and maintenance, maintains satisfactory performance throughout its service life. After the equipment manufacturing is completed, our company will conduct a detailed and comprehensive inspection of the quality and performance requirements of the equipment as stipulated in the tender document and the contract, and issue a product quality certificate and inspection record.

Dongguan Hongshun Automation Equipment Co., Ltd. is located in Dongguan City, the global manufacturing capital. It is a professional manufacturer of high-precision surface treatment equipment. Its main products include: A full range of ultrasonic cleaning equipment, vacuum hydrocarbon cleaning machines, high-pressure spray cleaning machines, spraying lines, passivation acid washing equipment, anodizing equipment, electroplating equipment, industrial pure water machines, reclaimed water reuse equipment, tunnel drying furnaces, and their peripheral supporting equipment, etc. The company integrates independent research and development, manufacturing, installation and training, and after-sales service. It also has a complete quality management system, strong technical strength.

With the continuous development of industry at present, enterprises have increasingly higher requirements for the surface treatment of products, and various surface treatment processing-related equipment is adopted by more and more factories. Our equipment is widely used in various industries such as new energy, die-casting, auto parts, electronic circuit boards, bearing parts, optical lenses, vacuum ion plating parts, hardware electroplating, degreasing and waxing parts, powder metallurgy, medical devices, liquid crystal displays, aviation equipment, etc. The company's products not only serve customers all over China, but are also exported to countries such as Thailand, South Korea, Vietnam, the Philippines, Cambodia, Indonesia, Russia and Italy.

We provide reliable services to every enterprise with a demand for surface treatment equipment. Our strong core software development team and overall design team for electronic circuits and mechanical appearance can ensure that our equipment remains in a leading competitive position in the industry and meets the usage requirements of a wide range of customers. Our experienced customer service team Professional technology and services can provide you with all-round 24-hour technical consultation and services before, during and after sales, so that you have no worries at all.

We will continue to uphold the concepts of honest operation, attracting talents widely, technological innovation, craftsmanship spirit and customer service first, so that our equipment can make due contributions in meeting customers' flexible production needs, replacing manual labor, environmental protection, energy conservation, automatic intelligence and other aspects, and push surface treatment equipment to a new level to serve customers all over the world.