2.4 Inch IPS TFT LCD Display 240x320 MCU 16 Bit Tft Lcd Display
Product Details
| Size (inch): | 2.4 |
| Resolution: | 240*320 |
| Brightness (cd/m2): | 350 |
| Interface: | MCU 8//16 BIT RGB 16/18BIT |
| Driver Ic: | ST7789V |
Product Description
| Size(inch) | 2.4 |
| Resolution | 240*320 |
| Brightness(cd/m²) | 350 |
| Interface | MCU 8//16 BIT RGB 16/18BIT |
| Driver Ic | ST7789V |
| Operation Temperature(°C) | -20~70 |
| Pin Number | 40 |
This type of MCU 8//16 BIT RGB 16/18BIT can be suitable for a
variety of scenarios. From the datasheet we can know the driver of
the LCD is is ST7789V. THE lowest operating temperature can reach
-20°C (-4°F) and highest is 70°C (158°F).
This 2.4-inch IPS TFT display, with a resolution of 240x320 and
16-bit color depth, is primarily used to provide a high-definition
and highly expressive graphical human-computer interaction
interface for single-chip microcomputer systems.
Its application scenarios mainly revolve around single-chip
microcomputer projects that require visual information display and
basic operation feedback. They can be classified into three main
categories.
1. Local interaction terminal for embedded control systems
The core requirement of this scenario is to enable users to operate
the equipment intuitively or view the equipment status without
connecting to a computer.
Industrial control field: Used for local panels of small PLCs and
sensor controllers, to display real-time temperature, pressure,
etc., or to set parameters through touch (requires a touch screen).
Smart home devices: Integrated on smart switches, thermostats,
humidifiers, etc., to display the current mode, values, and support
button/touch switching functions.
Medical health devices: Used for portable pulse oximeters, blood
pressure monitors, heart rate monitors, to clearly display
measurement data and waveform graphs, improving data readability.
2. Display core for portable electronic devices
This scenario values the balance of display size, power
consumption, and picture quality, and is suitable for
battery-powered mobile devices.
Handheld measuring instruments: Such as mini oscilloscopes, signal
generators, multimeters, to display waveforms and numerical change
curves in a graphical interface, which is more intuitive than
digital tubes.
Consumer electronic terminals: Used for retro consoles, portable
MP3/MP4 players, small game consoles, with 16-bit color depth to
present more rich colors and enhance the entertainment experience.
Internet of Things (IoT) terminals: Such as soil monitoring nodes
for smart agriculture, logistics trackers, to display collected
temperature, humidity, location, etc., information without network.
3. Prototype verification for education and maker projects
This scenario requires flexibility and low cost, and is suitable
for learning and validating ideas.
Single-chip microcomputer teaching experiments: As a display for 51
single-chip microcomputers, STM32, Arduino, etc., used to
demonstrate basic functions such as graphic drawing, text display,
image refresh, etc.
Maker creative projects: Such as DIY weather stations (displaying
temperature and humidity, weather icons), smart clocks (displaying
time, date, lunar calendar), robot control panels (displaying
motion parameters), quickly achieving the visual effect of the
project.
FAQ:
1. I want the LCD display 8 digits and the outline size is
65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your
specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable
one
if it is standard products. Or we can customize for you based on
your own requirement.
2.This LCD is just what we want, but it is big size, do you have
any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the
outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have
not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing
paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is
one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can
finish earlier, we will report the information in advanced.
